Crewcab update...
^^^What he said. Around here all the offroad guys want the kingpin D60's for their trail rigs. None of them want dually adapters or hubs. That's why the one i mentioned earlier is still sitting on CL. If it was single wheel it would have been gone within the week.
Been working on the main bathroom reno's, and put down some mud so decided to do a little work while waiting for it to dry. 
Pulled out my spare tire holder and hit it with the knotted wire wheel on the 4.5" grinder.

The holes where the rods run through were wallowed out...figured I'd weld on a couple washers.


And washers welded on.


It's in the garage now getting a couple coats of Tremclad paint.

Pulled out my spare tire holder and hit it with the knotted wire wheel on the 4.5" grinder.

The holes where the rods run through were wallowed out...figured I'd weld on a couple washers.


And washers welded on.


It's in the garage now getting a couple coats of Tremclad paint.
Going to have to follow that too, thinking i should twin stick my power wagon to keep with the original theme. Kind of pointless with Manual hubs but still fun
Can't see the pictures here. If I copy the picture location to clipboard and paste it into the browser, I get photo bucket's message "this page does not exist." Link looks legitimate.
without the quotes
"http://i697.photobucket.com/albums/vv340/thrashingcows/84%20Crewcab/1st%20Gen%20spre%20tire%20holder/PICT0001_zpsgcdwmngx.jpg"
%20's are spaces in the URL. That's legit.
If somebody can see the picture, compare the url's and see if DTR or different browsers are messing with it.
My browser is firefox.
without the quotes
"http://i697.photobucket.com/albums/vv340/thrashingcows/84%20Crewcab/1st%20Gen%20spre%20tire%20holder/PICT0001_zpsgcdwmngx.jpg"
%20's are spaces in the URL. That's legit.
If somebody can see the picture, compare the url's and see if DTR or different browsers are messing with it.
My browser is firefox.







I'll have to put that on my list
