Dodge Diesel - Diesel Truck Resource Forums - View Profile: oliver foster



oliver foster oliver foster is online now

Registered User

Visitor Messages

Showing Visitor Messages 1 to 10 of 31
  1. candp
    06-30-2017 10:45 PM - permalink
    candp
    hay oliver!might you have dually fender passenger side for 1993 ram w350 le thks candp
  2. halfpint23
    06-29-2017 02:36 PM - permalink
    halfpint23
    I am still looking for an engine bay harness for the truck described in my original message. If you know of (or have) one, please let me know.
    Thanks,
    Kate Triplett
  3. halfpint23
    06-22-2017 11:39 AM - permalink
    halfpint23
    Wiring demons are eating me alive on the 96 3500. Too many idiots in Canada hacked up the harness right at plug into PCM, and they evidently tweaked out some of the pin sockets in the plugs as well.
    Too many intermittents. Too many issues. NEED to get a new (or at least unsullied clean etc) harness for under the hood/engine bay. If the line(s) that run down to transmission is available, those would be good to have as well..
    Email is great, [email protected]
    We are in WA State
    Does you have the harness I need? 1996 3500 4WD with 47RE transmission.
  4. rlyons
    06-09-2017 07:47 PM - permalink
    rlyons
    Oliver, would you happen to have the vaccum sensor under the left hood hinge on a 92?
  5. LBourque
    01-29-2017 08:10 AM - permalink
    LBourque
    I'll get the money order tomorrow,Monday. Thanks.
  6. eljefedavies
  7. edwinsmith
    11-28-2016 11:31 AM - permalink
    edwinsmith
    Oliver: can you ask the delivery driver to place the valance in the bed of the pickup? I am on my way to San Francisco for a week. I hope you had a good Thanksgiving.

    Edwin
  8. edwinsmith
    11-17-2016 07:26 PM - permalink
    edwinsmith
    Hi Oliver. I need the front valance which is the piece of body work below the grille just above the frame. I have an 89 that I'm needing to put the later model grille on to accommodate 2 fans I put in front of the A/C condenser.

    I also need the windshield washer nozzles if they're OK.

    NtJman said that you had these. What would you want for them?

    Edwin
  9. b55
    11-09-2016 09:03 AM - permalink
    b55
    Hi Oliver. Any chance you still have any of those steering box brackets (part #52037876)? If so, let me know how much (with shipping to bay area, California), so we can work this out.
  10. TruckYou
    08-16-2016 05:51 PM - permalink
    TruckYou
    Hey Oliver foster. I just saw your comment. If you could dig up a spare nut for the steering gear box that would be a huggge help. I measured the threaded shaft on the gear box with my calipers, but it seems to be a goofy size. Inside thread to inside thread on that stud measurea approx. .830 thousandths

About Me

  • About oliver foster
    Truck Brand
    dodge
    Truck Model
    3/4 ton
    Truck Year
    '01
    Truck Mods
    Bfaf, Edge Attitude w/ juice, Banks high ram and monster 5" exhaust, Reunel front and rear bumper, front bumper w/ winch
    Location
    vermont
  • Signature
    '01 QCLB, 4x4 NV.... SOLD
    '95 2500 RCLB 12V/NV-45 4x4, 3.54
    '95 3500 EC/Dually 12V/NV-45 4x4, 3.54
    '91.0 W-250 RCLB, 'Rag, 3.54
    '85 W-350 crew, '90 12V/Rag, Cooler Tubz, 6' lift, 37x13.5, D/60F-D/80, 4.10
    '85 W-350 crew, '90 12V/NV-45, HX-35, 24V intercooler, tubes, boots and I-horn, airbags over springs at all 4s, 3.07s
    '89 Ramcharger '92 12V/Rag with D-60/70 3.54s
    '92 W-250 12V auto, yard plow truck 87,xxx MILES!
    '89 W-350 Dump 12V, 'Rag, Yard, Dirt/Firewood shuttle

Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 07:37 PM
  • Join Date: 12-30-2008
  • Referrals: 1

Friends

Showing Friends 1 to 5 of 5

All times are GMT -5. The time now is 07:48 PM.


Copyright 2017, DieselTruckResource.com