MoparNut

I'm planning a complete stereo overhaul in a couple months and am trying to get ideas on equipment to buy. My question is what size are the rear door speakers? I've read some people use 5.25" and others say they put in 6 or 6-1/2". Will the 6 1/2" fit without modifications?

White Dodge

I replaced the back speakers in mine and it didn't look like you could get a 6-1/2" will fit.

spooling

i put infinity 6.5's in my 05 no prob

dan33900

6.5,s in my 06 pioneer 4 way & they sound great

metalaram

6.5s in 4 different rams. its tight but doable.

Bikinaz

You'll just need to drill a couple small pilot holes, or use self tapping screws. Piece o cake.

fordracing19

I put Alpine 6.5 front and 5.25 rear.

MoparNut

Thanks for the info. So the 6.5s will fit in the opening ok, I'll just need to redrill screw holes?

spooling

the speakers i bought (infinity) had an adapter from 3 mounting points (truck door) to four mounting points (speaker)

STate

I think the front speakers on my 04.5 are 6x9. Are your doors different and will mine take a 6.5 or is the 6.5 a better option for sound?

Bikinaz

Correct. I can't remember what size drill bit I used, but it was probably one of the smaller ones.

cbrahs

there is a sweet install thread on the performance/accessories page.