Any reputable tranny builders in Northern UT or Northern CA?
10-09-2006, 06:44 PM
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: Draper, UT
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Any reputable tranny builders in Northern UT or Northern CA?
I'm looking to get a new torque converter and valve body for my '05 but don't know any reputable tranny builders I could go to. I live in northern Utah but travel to northern California quite frequently, so I'd like to find someone between those two areas. Thanks!
Jared
Jared
10-09-2006, 06:54 PM
#2
Banned
Join Date: Sep 2004
Location: Pollock Pines, CA
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
J&H Performance in Redding, CA all the way. They are a DTT builder/installer and do top notch work. They also host/sponser lots of Diesel events as showen in Diesel Power mag. They are very nice and professional. Their tranny builder Joel is very smart and takes the extra effort. It takes them a week to do the complete tranny. They spent the whole Thursday and Friday dialing in my custom hot rod VB. They were $2,000 cheaper then the nearest ATS installer.
A+ in my book
http://www.jandhperformance.com
A+ in my book
http://www.jandhperformance.com
10-09-2006, 07:09 PM
#3
Registered User
Join Date: Jul 2006
Location: Utah
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Yep, I agree with BigDan, those guys are top notch in my book (J&H). I have had a couple of dealings with them and they are a super bunch of people to work with.
Plus, they really know their stuff, big power!
I don't trust most of the so called tranny guys here, (I'm in Bluffdale)--------I'm sure there is a few but haven't run in to any. Thats why I opted for a complete replacement of everything, and that I just did myself.
Best of luck,
Lance
Plus, they really know their stuff, big power!
I don't trust most of the so called tranny guys here, (I'm in Bluffdale)--------I'm sure there is a few but haven't run in to any. Thats why I opted for a complete replacement of everything, and that I just did myself.
Best of luck,
Lance
10-09-2006, 07:39 PM
#5
Registered User
Thread Starter
Join Date: Dec 2005
Location: Draper, UT
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I'll have to contact both of them. I have some friends in Sacramento, so I could stay with them while my tranny is getting worked on in Redding. Although, having the tranny builder closer to home (West Haven is only half an hour from me) would be MUCH more convenient, especially if something were to ever go wrong. I'm dying to get it done, but I'm still a few months out moneywise.
Jared
Jared
Trending Topics
10-09-2006, 11:14 PM
#10
Banned
Join Date: Sep 2004
Location: Pollock Pines, CA
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
J&H has price sheets listed on their site!!!!
Personally I like the fact of having my tranny custom built at the shop instead of a generic tranny ariving on a pallet and then installed in my truck. Every truck is different and requires different tuning.
Personally I like the fact of having my tranny custom built at the shop instead of a generic tranny ariving on a pallet and then installed in my truck. Every truck is different and requires different tuning.
10-09-2006, 11:35 PM
#11
Moonlight orders the parts from DTT then they build your trans with the parts. then they tune the trans to your truck.
it's the same as if you drove to Canada and had DTT build it.
DTT builders have to fly to Canada and go through DTT's school to even become a builder, they build them the same way with the same beef as DTT of Canada!
10-09-2006, 11:39 PM
#12
Registered User
Join Date: Apr 2006
Location: Farmington, Utah
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
T398
Thread
Thread Starter
Forum
Replies
Last Post
Idaho Guy
3rd Gen High Performance and Accessories (5.9L Only)
5
07-08-2008 04:38 PM
S.Dodge
Performance and Accessories 2nd gen only
21
04-13-2007 12:07 PM