Who's going for the Record??
Registered User
Joined: May 2005
Posts: 2,088
Likes: 0
From: Katy, TX off north Mason Road.
Registered User
Joined: Aug 2003
Posts: 3,604
Likes: 0
From: Jeffersonville, Ohio
Registered User
Joined: Jan 2004
Posts: 439
Likes: 0
From: Eureka,CA
I’m trying to figure this comment out????? I was there when he turned those numbers on the dyno. I worked on his pickup right before he got up on the dyno and he gained 100hp compared to where he was at the last time he dynoed. Different dyno, but he told me that it was like having a totally different pickup when he got done going on a road test. For those of you who care his numbers are uncorrected. Really nice guy if you ask me.
Stomp
Stomp
Registered User
Joined: Feb 2010
Posts: 1,044
Likes: 1
From: A 5th dimension, beyond that which is known to man.
Those are big numbers and kind of hard to believe. 294cc's of fuel out of a 12mm pump at least if the 1cc per 2hp thing is correct. That thing must burn clean to make that power.
Registered User
Joined: Aug 2008
Posts: 1,450
Likes: 0
From: West Palm Beach, Florida
I’m trying to figure this comment out????? I was there when he turned those numbers on the dyno. I worked on his pickup right before he got up on the dyno and he gained 100hp compared to where he was at the last time he dynoed. Different dyno, but he told me that it was like having a totally different pickup when he got done going on a road test. For those of you who care his numbers are uncorrected. Really nice guy if you ask me.
Stomp
Stomp
I guess it doesn't really matter in the grand scheme of things, might be better to not know. Great numbers either way! 
Hey Stomp, you wanna tweak my truck for me? I could do with a few extra horses!
Registered User
Joined: Feb 2005
Posts: 763
Likes: 0
From: Browns Valley CA
I was at that event and must say, Toms truck is really nice. I remember him coming back from his first test drive after the tweaking. The grin went from ear to ear. I ran on the same dyno that day and my numbers were right were they had been. When you see a first gen parked at Ponci's with the hood up and Brad & Jeremy both working on it, hp is fixing to improve.
I ran on the same dyno that day and my numbers were right were they had been. When you see a first gen parked at Ponci's with the hood up and Brad & Jeremy both working on it, hp is fixing to improve.
Registered User
Joined: Aug 2008
Posts: 1,450
Likes: 0
From: West Palm Beach, Florida
I was at that event and must say, Toms truck is really nice. I remember him coming back from his first test drive after the tweaking. The grin went from ear to ear. I ran on the same dyno that day and my numbers were right were they had been. When you see a first gen parked at Ponci's with the hood up and Brad & Jeremy both working on it, hp is fixing to improve.
I ran on the same dyno that day and my numbers were right were they had been. When you see a first gen parked at Ponci's with the hood up and Brad & Jeremy both working on it, hp is fixing to improve.
Nice!
Thread Starter
Registered User
Joined: Feb 2008
Posts: 1,044
Likes: 5
Got the truck back. Really sounds like it's going to blow up with 27 deg of timing, but it got 26mpg on the way down south going 65-70mph. Can't complain there. Anxious to see what kind of power it will put down!
Registered User
Joined: Aug 2008
Posts: 1,450
Likes: 0
From: West Palm Beach, Florida
Gonna need a vid' when you hit the rollers!!!
I was thinking you had a stock 727. That WOULD have been outstanding! 
Thread
Thread Starter
Forum
Replies
Last Post
Commatoze
General Diesel Discussion
20
Aug 22, 2006 10:31 PM