9MM

Well like the title says does anyone have any pics of the swap I have seen somewhat of how pullitillbroke has his with the gen two intercooler but I would like to see others please .

9MM

Also if I picked up one of these would I blow the out of it?

http://cgi.ebay.ca/27x7x2-5-FMIC-TURBO-INTERCOOLER-EAGLE-TALON-MIRAGE-/330359445357?pt=Motors_Car_Truck_Parts_Accessories&hash=item4ceaf5176d
Oh almost forgot GO CANUCKS GO

thechoochlyman

Yes. Way too small. The best thing you can do is swap in a large Powerstroke intercooler.

9MM

How hard is that gonna be to swap in.
And what do they go for.

thechoochlyman

Here's one really good write up. I think RichieO is over here too, actually. Most of the time people will try to find a used one for around $200 or so.

9MM

I think i'd rather do a second gen cooler install.

Free89W350

A second gen is a easier fit in the non ic truck. I put a powerstroke in mine and it was alot of work however for the price of the ic I couldn't say no. Either way it is going to be a HUGH improvement and you will really notice it. No matter which one you go with just take your time and you'll be fine.

9MM

Like performance and cooling or just cooling increase?

apwatson50

I've picked up two used powerstroke intercoolers for ~100 each. A 2nd gen should be just as easy to find.

Richie O

Yup, Im here too.

Free89W350

Both. If you watch your boost guage it will be less due to the area the intake air is now running through but it will be cooler which makes it feel stronger.