hx40 good or bad??
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Indiana
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
hx40 good or bad??
What's the opinions on the hx40 I found one for sale with a 60in/85ex with a 16mm waste gate how will this act for a everday driver with a some towing?
#5
Administrator
5.9Shaker:
I ran an HX-40/16 on both my 1996 Dodge CTD 12 valve and also my now sold 2002 Dodge CTD 24 valve. IMHO,....I think the HX-40's did a great job both with performance and towing. I see you have a 2001. On my 2002, I had it set-up with a TST PM 3 "stacked" with an Edge EZ along with 100 H.P. injectors and a fully built ATS tranny.
Although the HX-40 was a little slower to spool than the stock HY-35/9, I would not say there was a huge difference. I towed my 1996 on a 24' Kaufman Flat Bed Trailer and never had any troubles towing it with a weight of over 10,000 lbs. I had tried an 18cm housing and it was WAY too laggy, but the 16cm housing worked very well.
I hope this helps you some.
--------
John_P
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hawkeye
Performance and Accessories 2nd gen only
11
09-23-2003 08:22 PM