Mike D

I only have experience with what I run on my truck, which is a factory lift pump mounted on the frame and Holley Blue fuel pump mounted near the fuel tank. The holley feeds the stock pump and from there to the fuel filter housing. It supports what I run for injectors and has been on my truck for about 3yrs without issue.

rollcage

Thanks,

How did you wire the Holley Blue fuel pump ?

Where is the best place to get the 3 guages on the pillar?
Can I retain the litle speaker on the pillar?

dzlfarmboy

Our tow truck has BHAF, Mach 1.6's, Smarty MITUSA fuel pump Stock charger, SB Clutch. And makes a solid 350hp on the dynojet. Tows great but it can get a lil warm going up long grades in 6th gear.

Brett

Mike D

I used a relay. I tapped the power wire off the stock wire harness as the trigger for the relay. Wired like this, both pump come on at the same time.

high bid

running the same fuel supply setup mounted to the frame by the xfer case feeding the factory LP...works great w/23psi of fuel filtered to 2micron.