Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

edge comp problems?

Old Jan 23, 2006 | 01:55 PM
  #1  
curts99's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 270
Likes: 0
From: waterford ca
edge comp problems?

1999 cummins 4" straight pipe edge comp very little smoke on 5x5 sould i see alot of smoke? second comp ive put in thinking first one was defective, drove 2001 with comp lots of smoke any suggestions or answers?
Reply
Old Jan 23, 2006 | 02:03 PM
  #2  
duallydave's Avatar
Registered User
 
Joined: Jan 2005
Posts: 1,226
Likes: 0
From: vernon b.c. canada
Talking

how does the power feel?is there a diference from setting 1-5?if not check your conection to the injection pump.also check the ground.she should smoke.before the injectors mine would smoke but not huge,with the injectors its huge till turbo spools up.check those conections,you may be in ez mode.
Reply
Old Jan 23, 2006 | 02:04 PM
  #3  
curts99's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 270
Likes: 0
From: waterford ca
has great power some smoke at beginng of first gear till turbo spools up good ground and good fuel pump tap
Reply
Old Jan 23, 2006 | 02:58 PM
  #4  
99 cummins's Avatar
Banned
 
Joined: Nov 2002
Posts: 909
Likes: 0
From: Illinois
With stock injectors if your truck is running good you probably won't get much smoke. As long as you have enough air to burn the fuel your injectors are sending through you should be smoke free. This is a good thing, means you have your truck balanced right on the air to fuel ratio. If you want smoke get a set of RV 275 injectors, turn the Comp up and watch it roll. But remember smoke means wasted fuel for daily driving.
Reply
Old Jan 23, 2006 | 03:37 PM
  #5  
mx yfz 450's Avatar
Registered User
 
Joined: Nov 2005
Posts: 74
Likes: 0
From: utah
My comp only works on setting 1*5 now.Sometimes it freezes.Egde said i needed the software update on it to keep this from happining I am going to edge to get the version 8.0 software update on wesnday. They say if you have a 7.0 version box that it would bennifit from updating the software. While i'm there i'm getting the drag mod wohoo.
Reply
Old Jan 23, 2006 | 08:59 PM
  #6  
curts99's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 270
Likes: 0
From: waterford ca
my comp is the version 8.0 i know alot of smoke isint good hard on motor and waists fuel but it sure is cool thanks for the help im new to the diesel performance any suggestions on trans up grades ats makes good stuff dont they what about bd?
Reply
Old Jan 24, 2006 | 07:07 AM
  #7  
Joe Diesel's Avatar
Registered User
 
Joined: Sep 2002
Posts: 794
Likes: 1
From: Toronto, ON
So how can you tell what version of software you have??
Reply
Old Jan 24, 2006 | 07:09 AM
  #8  
BigBlue's Avatar
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
There should be a label on the back of the comp stating which version you have.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lvmknsmoke..
Performance and Accessories 2nd gen only
2
Nov 21, 2024 07:33 PM
13jy831
Performance and Accessories 2nd gen only
4
Feb 25, 2011 07:45 AM
mx684
Performance and Accessories 2nd gen only
13
Jul 24, 2007 07:52 PM
JD farmboy
Performance and Accessories 2nd gen only
4
May 21, 2006 01:04 PM
rockjeep73
Performance and Accessories 2nd gen only
7
Mar 25, 2005 03:34 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:26 PM.