I got a question for anyone who has the DT Tracbar. I have the standard non HD version and the Heim joint is out on mine. So i am curious if anyone knows the size of the Heim joint. I been trying to get ahold of DT profab for awhile now and i just keep getting the answer machine. Left a message with them, but havent heard back yet.

Also if you have a suggestion of where to buy them, i would really like to get one before the end of the week so my truck can get back on the road.

Thanks for the help

 

Call some of their dealers, like http://www.dynomitediesel.com/ that are on their website under "dealers"....

 

thanks i did not think of that, will call them tomorrow and see if any of them can help me out.

 

I emailed DT and got a response with in a couple of hours, and continued to communicat through emails. ED

 

They have a rebuild kit on their website. Might as well replace the bushings on the other side while you're at it. I did mine last week.

 

i know they have a rebuild kit on the website, i was just wanting it sooner and was looking to talk to live person, mainly cause i wanted to see if i could switch over to the HD kit. But if anyone is curious the standard kit is a 5/8 bore, with a 5/8 righthand thread. Thats what the guys at randy offroads told me. They also sell the rebuild kit. Maybe its just me but on some things i just like to have a real life person to talk too. And on a side note the HD kit is 7/8 thread. which requires you to change out the adjustment sleeve.

 

Sorry to hijack, but how do you like the dt trac bar?

 

Well its been great so far. Just as stated make sure you get the heim joint and bushings at the same time. Really now that i look at it i'm not sure if the HD unit is worth it. My bushing went out about the same time as the standard heim joint so if you extend the life of the heim joint your still gonna be replacing the bushing at 40k or round about.