changed fuel filter, won't start
Thread Starter
Registered User
Joined: Oct 2008
Posts: 944
Likes: 4
From: Spokane, WA
changed fuel filter, won't start SOLVED
followed instructions on this site http://wiki.dieseltruckresource.com/..._Filter_Change
Bumped starter a few times, started it, it ran for 5-10 seconds and quit. I've bumped it a few more times, made sure there's fuel in canister (I opened valve and it came out at good pressure) Bumped it some more and it won't start.
I wish changing fuel filter was easier than this, this is frustrating.
Bumped starter a few times, started it, it ran for 5-10 seconds and quit. I've bumped it a few more times, made sure there's fuel in canister (I opened valve and it came out at good pressure) Bumped it some more and it won't start.
I wish changing fuel filter was easier than this, this is frustrating.
Registered User
Joined: Jan 2005
Posts: 3,899
Likes: 3
From: Yuba city Kalifornia
You should do it 2-3 time to purge the air you might need to open 3 injector lines ,have a helper crank on it as you close the injector lines one at a time as it starts , I usually open the 3 easyest
Registered User
Joined: Sep 2009
Posts: 109
Likes: 0
From: North Zulch, TX
Thread Starter
Registered User
Joined: Oct 2008
Posts: 944
Likes: 4
From: Spokane, WA
Thread
Thread Starter
Forum
Replies
Last Post
mattzram
24 Valve Engine and Drivetrain
6
Oct 9, 2006 11:38 AM
mattzram
24 Valve Engine and Drivetrain
5
Oct 1, 2006 07:01 PM
fitzydog
24 Valve Engine and Drivetrain
8
Apr 21, 2005 09:04 PM
