I need to lower my headlights on my truck after installing the 2" leveling kit. It seems that every oncoming vehicle flashes me. Anyways, I read on here that there are two adjustments, but that doesn't make sense on the 06. It also doesn't mention anything about aiming in the 06 manual. I am wondering if you have to take the headlight assembly out of the truck to do aiming adjustments? I think there is one adjustment on the side of the lights nearest the radiator, but I see nothing on top. Thanks for any insight or help on this.

 

The adjustment on the side nearest the radiator is for the up and down and it uses a T-20 torx driver to do it. Left is down, right is up. Mine were a mile out from the factory too. I have never seen a left and right adjustment for them. Anyone?

 

The early 3rd gens had a left/right adjustment screw located between the bumper and headlight assembly. But I think this was dropped in '05??

MikeyB

 

These instructions seem a little complicated, but it's really very simple to do. I done this to my truck and it makes a lot of difference.

 

Many thanks...I'll give it a shot maņana.

 

has anyone had problems with adjusting headlights it seems dodge has negleted to put adjusters in for side to side adjustment they have only up and down dealer says to go to body shop to ailign side to side as my lights aim way into on coming traffic has anyone had this problem ad how did you solve
thxs

 

From what I have read the US does not think we need side to side aiming. Here is a link that might help with the aim.
http://www.danielsternlighting.com/tech/aim/aim.html

 

Did you get them adjusted?