kully560

so everbody who has run a custom torque tube do you think it is worth it as far as improvements I see them on ebay all the time so I am thinking about .need advise

Argo

I have been wondering the same thing for a couple of weeks and am debating on buying it or not.

HorseHauler

I made my own, much cheaper. Only improvements with this is a louder whistle. I have this with no silencer ring and have nice whistle. Wanting to get an intake sometime to get the most whistle possible.

IA_James

They don't actually do anything, just make the turbo more audible. If you feel the need to be able to hear your turbo more, do it. If not, they aren't worth the money.

rockittboy

if you put a sticker on it that has japanese writing it will make your dodge run in the 12's. low 12's that is.

Boz007

Can the AFE torque tube be used with a BHAF?

Javahjoeo

I installed a (made it myself $34) torque tube, and it didn't make my turbo any louder. However, it did let my turbo spool up quicker. I like mine! Not if I paid the ebay price. javahjoeo from Kokomo

N.Johnson

I've got a 6.25" long by 5.25" dia. by 1/8" wall piece of hydraulic cylinder steel tube in mine. The inside is machined and chromed as it comes in stock lengths and I simply painted the outside flat black. Cost?........$0.00. I took several measurements of the stock baffle tube the length and dia. matched. You can use a piece of 5" sch.10 stainless pipe which I'm going to find someday on the job site.