3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

lift pump

Old Dec 18, 2008 | 02:52 PM
  #1  
sterling's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 136
Likes: 0
lift pump

I was thinking to use a set of 12 volt electric fuel pumps made for gasoline engines to pump diesel from the fuel tank to both diesel engines in my boat .
Are the gasoline pumps going to survive diesel oil ?
Or am I better off with so called diesel pumps ?
I found that the gasoline pumps are much cheaper ,or is that for a reason?

thanks A.J
Reply
Old Dec 18, 2008 | 03:34 PM
  #2  
rip 112's Avatar
Registered User
 
Joined: Mar 2007
Posts: 4,813
Likes: 2
From: LaGrange, Texas
Honestly I would look at the Holley Blue pumps, they can handle gas or diesel...For the price they should be fine...not too expensive...
Reply
Old Dec 18, 2008 | 03:59 PM
  #3  
kantdrive55's Avatar
DTR Advertiser
 
Joined: Mar 2005
Posts: 816
Likes: 1
What type of fuel volume do you need? What motors are you running?
Reply
Old Dec 18, 2008 | 04:07 PM
  #4  
cdennyb's Avatar
Registered User
 
Joined: Jan 2007
Posts: 719
Likes: 0
From: In Oroville, Ca., same house for past 46 yrs!
mount them low so they have a good head, and remove the brass screens in the pump housing, (they can get clogged easily with cold fuel) then shim the regulator spring with at least a .040" shim washer to provide good psi, no problem. I use the larger housing "Black Holleys" under my truck and they hum along endlessly without issue cold or hot.
Reply
Old Dec 18, 2008 | 04:22 PM
  #5  
sterling's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 136
Likes: 0
Originally Posted by kantdrive55
What type of fuel volume do you need? What motors are you running?

I have two Yanmars 6LY2A,s with 440 hp/at 3300 rpm a piece ,these are 5,8 L 6 cilinder inline 2 valve ,s with a line pump,they have 880lbs/ft a piece ,and use 90 Litre /hour (24 gallon/hr) full throttle.

I am going to turn up the fuel at the pumps and hope to reach about 500 hp a piece ,so I guess 28 gal/hr ???

thanks A.J
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Txwelder
HELP!
450
Nov 26, 2025 01:53 AM
Txwelder
12 Valve Engine and Drivetrain
2
May 19, 2005 06:10 PM
Yukon Dodge
24 Valve Engine and Drivetrain
18
Jul 1, 2004 10:08 AM
Puke
24 Valve Engine and Drivetrain
7
May 22, 2003 12:18 AM
Haulin_in_Dixie
24 Valve Engine and Drivetrain
47
Nov 17, 2002 09:30 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:24 PM.