3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!
Sponsored by:
Sponsored by: DashLynx

Edge Hot & MP-8 for a 05

Thread Tools
 
Search this Thread
 
Old 11-12-2008, 11:37 PM
  #1  
Registered User
Thread Starter
 
SINGLESTACK's Avatar
 
Join Date: Aug 2007
Location: Delta, Pa
Posts: 323
Likes: 0
Received 0 Likes on 0 Posts
Edge Hot & MP-8 for a 05

Does anyone run this combo on a 05 and have you ever dynoed with it. I know one guy made 507hp and 9??tq with a stock turbo, a hot juice and a ez. What would be better a ez to stack or a mp-8?
Old 11-12-2008, 11:41 PM
  #2  
Registered User
 
dropped2500's Avatar
 
Join Date: Jan 2008
Location: Harker Heights,Tx
Posts: 476
Likes: 0
Received 0 Likes on 0 Posts
i would like to know as well!
Old 11-12-2008, 11:44 PM
  #3  
Administrator/Jarhead
 
madhat's Avatar
 
Join Date: Jun 2006
Location: Jacksonville, NC
Posts: 14,965
Received 19 Likes on 19 Posts
I made 434/808 with just supporting mods and the hot edge... no MP8. I have a dyno sheet somewhere with what the MP8 gained... I'll post that when I get a chance.

I think that the MP8 is more adustable than the EZ, but I am not certain.
Old 11-12-2008, 11:53 PM
  #4  
Registered User
 
dieselram_04's Avatar
 
Join Date: Oct 2004
Location: Southern IL
Posts: 280
Likes: 0
Received 0 Likes on 0 Posts
the MP8 has a **** going from 0 to 100 percent as where the EZ has 3 or four settings so the MP8 is a little more precise in the tuning department.
Old 11-13-2008, 10:29 AM
  #5  
Registered User
 
cquestad's Avatar
 
Join Date: Dec 2003
Location: Boise, Idaho
Posts: 5,540
Likes: 0
Received 0 Likes on 0 Posts
527 on a 62/65/14 with Hot Juice and MP-8 with really small injectors.
Old 11-13-2008, 11:09 AM
  #6  
Registered User
Thread Starter
 
SINGLESTACK's Avatar
 
Join Date: Aug 2007
Location: Delta, Pa
Posts: 323
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by cquestad
527 on a 62/65/14 with Hot Juice and MP-8 with really small injectors.
Was that on a 325-600 or a 305-555
Old 11-13-2008, 06:57 PM
  #7  
Registered User
 
bighornram's Avatar
 
Join Date: Sep 2006
Location: Delta, PA
Posts: 684
Likes: 0
Received 1 Like on 1 Post
Originally Posted by SINGLESTACK
Was that on a 325-600 or a 305-555
305/555 Juice module does pressure too I believe. Not a good idea to stack a pressure box... My $.02
Old 11-14-2008, 11:51 AM
  #8  
Registered User
 
cquestad's Avatar
 
Join Date: Dec 2003
Location: Boise, Idaho
Posts: 5,540
Likes: 0
Received 0 Likes on 0 Posts
it was on a 04.5...

NO PRESSURE by Juice on that year!
Old 11-14-2008, 08:54 PM
  #9  
Registered User
 
bighornram's Avatar
 
Join Date: Sep 2006
Location: Delta, PA
Posts: 684
Likes: 0
Received 1 Like on 1 Post
That's what I figured, just threw that out there so someone didn't make the mistake of doing it on an 03 and cracking an injector...
Old 11-15-2008, 01:39 AM
  #10  
Registered User
 
Torque master's Avatar
 
Join Date: Dec 2003
Location: Hawaii Big Island
Posts: 172
Likes: 0
Received 0 Likes on 0 Posts
I Had The Edge-Hot Juice Stacked With An--Edge --EZ on my 05- Dodge With A Automatic- Goerend Trans.
I have Since Sold That Truck And recently Purchased Another 05- Dodge-Ram-2500 It Came With an Edge Juice With Attitude Monitor Gauges. I Used it for a couple weeks as I new I was Going to Try The New Revo-Smarty , just was waiting for my Pillar Gauge TO arrive so I could install it prior to Revo Smarty.
Anyhow Quickly Went Straight to Catcher Tune#8 Still have my Stock Trans
( The Last Time I looked ) Hah! Goerend Full Billit Should be here within the Week. The Smarty Is hands Down the Best Programmer I have ever tried or Ran in Any of my 4-- Differant Dodge Ram-2500's I had an 02- 2-nd Gen
04- 3-Rd Gen , 05- 3-rd Gen , And now another 05-

Programmer Products tried:

Hypertech
Edge- Hot Edge Juice with Att-
Edge- Drag-Comp
Edge- Juice with Att
Edge--EZ
Bully Dog
Banks- 6-Gun
PPE-Hot-2
Old 11-15-2008, 07:45 AM
  #11  
Administrator/Jarhead
 
madhat's Avatar
 
Join Date: Jun 2006
Location: Jacksonville, NC
Posts: 14,965
Received 19 Likes on 19 Posts
I agree with the smarty comments.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whosdunit
1st Gen. Ram - All Topics
11
02-16-2019 04:07 PM
Strjock81
3rd Gen High Performance and Accessories (5.9L Only)
16
12-12-2007 09:53 AM
edwinsmith
1st Gen. Ram - All Topics
20
04-14-2006 03:53 PM
razor6
3rd Gen High Performance and Accessories (5.9L Only)
22
01-20-2006 03:43 PM
duallydave
Performance and Accessories 2nd gen only
3
08-07-2005 09:38 PM



Quick Reply: Edge Hot & MP-8 for a 05



All times are GMT -5. The time now is 04:24 AM.