Edge Hot & MP-8 for a 05
 

Does anyone run this combo on a 05 and have you ever dynoed with it. I know one guy made 507hp and 9??tq with a stock turbo, a hot juice and a ez. What would be better a ez to stack or a mp-8?

i would like to know as well!

I made 434/808 with just supporting mods and the hot edge... no MP8. I have a dyno sheet somewhere with what the MP8 gained... I'll post that when I get a chance.

I think that the MP8 is more adustable than the EZ, but I am not certain.

the MP8 has a knob going from 0 to 100 percent as where the EZ has 3 or four settings so the MP8 is a little more precise in the tuning department.

527 on a 62/65/14 with Hot Juice and MP-8 with really small injectors.

Was that on a 325-600 or a 305-555

305/555 Juice module does pressure too I believe. Not a good idea to stack a pressure box... My $.02

it was on a 04.5...

NO PRESSURE by Juice on that year!

That's what I figured, just threw that out there so someone didn't make the mistake of doing it on an 03 and cracking an injector...

I Had The Edge-Hot Juice Stacked With An--Edge --EZ on my 05- Dodge With A Automatic- Goerend Trans.
I have Since Sold That Truck And recently Purchased Another 05- Dodge-Ram-2500 It Came With an Edge Juice With Attitude Monitor Gauges. I Used it for a couple weeks as I new I was Going to Try The New Revo-Smarty , just was waiting for my Pillar Gauge TO arrive so I could install it prior to Revo Smarty.
Anyhow Quickly Went Straight to Catcher Tune#8 Still have my Stock Trans
( The Last Time I looked ) Hah! Goerend Full Billit Should be here within the Week. The Smarty Is hands Down the Best Programmer I have ever tried or Ran in Any of my 4-- Differant Dodge Ram-2500's I had an 02- 2-nd Gen
04- 3-Rd Gen , 05- 3-rd Gen , And now another 05-

Programmer Products tried:

Hypertech
Edge- Hot Edge Juice with Att-
Edge- Drag-Comp
Edge- Juice with Att
Edge--EZ
Bully Dog
Banks- 6-Gun
PPE-Hot-2

I agree with the smarty comments.