Windshield wipers
#1
Administrator
Thread Starter
Windshield wipers
Hi guys and gals, I finally got around to replacing the windshield wiper bushings. I pulled the whole assembly out and used a vise to put everything back together. I am reasonably certain that I got it all back together right, but now, the motor wants to stop with the wipers straight up, not laying down. It is almost like the motor is reversed. Could I have reassembled the mover bars incorrectly to cause this? Where is the stop control for the motor located, as part of the motor? I didn't mess with anything other than the mechanical part, no electrical. I have a new motor that I didn't install because the old one was still working. I am leaning towards taking it apart and replacing the motor, what think you guys...Mark
#2
Administrator
Thread Starter
Well, Duuuuuuuuu!, I figured it out. I put the arm on the motor 180 out. I like to believe that that is a mistake that any genius could make ...Mark
The following 5 users liked this post by maybe368:
Bob L (01-23-2019),
Diesel_Dawg (01-23-2019),
edwinsmith (01-23-2019),
NJTman (01-23-2019),
thrashingcows (01-23-2019)
#3
Administrator
Thread Starter
Hi guys, I am having trouble finding wiper arms for my exact truck. I found some for a 93 b350. Is there a difference? thanks Mark
#5
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,770
Received 1,637 Likes
on
1,112 Posts
Mid 90's f150 worked great on my truck. I think there's a thread or two about it. Rock auto, Napa, Amazon I think all carry them. A bit of massaging their bends, but otherwise a straight swap out with hook ends. No more pins to fail
#6
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,770
Received 1,637 Likes
on
1,112 Posts
The following users liked this post:
nothingbutdarts (01-23-2019)
#7
Registered User
B Series
4169583 Arm, w/Nozzle, Wiper
4389063 Blade, Wiper
D/W Series
4389233 Arm, Wiper
4389062 Blade, Wiper
The following 2 users liked this post by Diesel_Dawg:
maybe368 (01-24-2019),
thrashingcows (01-24-2019)
Thread
Thread Starter
Forum
Replies
Last Post
NJMurvin
3rd Generation Ram - Non Drivetrain - All Years
15
02-15-2005 10:45 PM