thrashingcows

Saw this over on 1stGen.org...thought there might be some interest here.

1stGen.org ? View topic - Dash Guage Pods !!!

I have sent an e-mail requesting a couple units. So This was a timely post for me, since I was about to bite the bullet and purchase a generic 3 pod dash unit to use....but would prefer the Banks unit.

freight train

I don't facebook but my wife does. I had her go in and like the 3 pod right side. I have one in my 1992 W350 and wouldn't mind putting one in my RC. Honestly though I wish they would consider a 2 pod right side as I already have a factory tach in my RC. So I would only be interested in it for a EGT and boost pressure gauges. But I am sure with the 3 pod I could add an oil pressure or water temp gauge to get a more true idea of the important info.

thrashingcows

That is what I want it for mainly...oil/water/volts and possibly fuel pressure if I opted for the 4 gauge pod.

mknittle

It's easy to fill holes in gauge pods.

thrashingcows

Guess I should go with the 5 gauge pod then.... Better to have too many, then not enough....

mknittle

Philip

I would rather see one made for the right side of the dash. Have it stand up in the section where the dash drops off to the glove box area. Keep the gages down out of sight for the light fingered crowd.

KRB

Cool!

I have the 2 pod on the right side and need a 3. I have two Westach 2 in 1 gauges so that will give me 5 readings total.

I have another gen 3 pod that sits on the left that I had been toying with modifying to work. Looks similar to the one in his picture. I like the looks of the ones that sit on the right but after riding around with the empty one on my left I think that would be more practical and in the line of vision Philip.

RamGuy84

There is a Facebook Group that is planning on making left and right hand Gauge pod's a 3-4-5 of each side I believe . I will try to keep everyone up todate as soon as I hear anything .

thrashingcows

I don't do FB....so that is why I posted up the link to the other thread...since it has an E-mail you can send your preferences too.

But would appreciate any updates as they come along.

mknittle

I wouldn't mind having a 3 pod on the right

thrashingcows

Come on, you have to go with a 5 pod...as you stated earlier...it's easy to fill those holes.

PapeCAT

If nothing else, you can put an autometer clock in one of the spots.

mknittle

I already have one of the old 4 holers on the right.
I meant to say I wouldn't mind a 3 pod for the left. I must be in sewing mode everything is backwards