Mine is in bad shape. Trying to find a new one and so far no luck yet.

Any leads on where to look? Guess I haven't tried chyrsler yet.

Andy

 

Why do you need to replace it? if the seal surfice is bad you can speedy sleve it!
if it leaking thru the splines, you can buy a rubber washer.(or just put silcone on the spines and retork the nut!)

unless the u-joint has spun on the yok or a broken bolt can't be remove, you can save it .......I did with a speedy sleeve.

 

If it is just the seal surface then a speedy sleeve is the way to go, but if you need a new yoke just go to a driveline shop or any spicer dealer, it is a spicer part, you might have a little trouble looking up the part #, but shouldnt be too bad. I wouldnt go to the dealer.
I use jesse at high angle driveline, he will for sure be able to get you that yoke, and at a good price, check it out highangledriveline.com.

Ian-

 

It was allowed to run loose before I got the truck and now does not fit tightly on the splines.

I will give HAD a call and see what Jes has to say, need to get some price ideas for my rock bugy anyways.

Andy