1990 D250 to W250
Thread Starter
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
Bad teen issues. that is probably worse than baby sitting my wife. Much worse
Robin feels much better she just has to learn that it will take time for her body to catch up with how she feels.
Thread Starter
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
Registered User
Joined: Apr 2010
Posts: 403
Likes: 18
From: Alberta, Canada
Not much work getting done on the truck lately. My wife's health has been deteriorating. She has been slowly grinding to a halt for the last couple years. Last Friday she passed out at work and was rushed to the hospital. Saturday evening they installed a pacemaker and the results were an immediate improvement.
Now Maybe as she gets to where she can do more I can get some more done on the truck.OOps forgot the holidays are coming up
Oh well at least the heavy stuff is done.
Now Maybe as she gets to where she can do more I can get some more done on the truck.OOps forgot the holidays are coming upOh well at least the heavy stuff is done.
Cheers!
Mike
Registered User
Joined: Dec 2010
Posts: 6,837
Likes: 1,683
From: Land of the Toxic Avenger
Not much work getting done on the truck lately. My wife's health has been deteriorating. She has been slowly grinding to a halt for the last couple years. Last Friday she passed out at work and was rushed to the hospital. Saturday evening they installed a pacemaker and the results were an immediate improvement. Now Maybe as she gets to where she can do more I can get some more done on the truck.OOps forgot the holidays are coming up
Oh well at least the heavy stuff is done.
Now Maybe as she gets to where she can do more I can get some more done on the truck.OOps forgot the holidays are coming upOh well at least the heavy stuff is done.
Buy her flowers. Women always seem to feed off that crap...
seriously, hope she's better now.
Thread Starter
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
Well I finally got around to ordering my hose and fittings for my hydroboost/RR steering
I picked up a new master cylinder for a 1994 K3500 a couple weeks ago. I need to get a 19/16-18tube nut and some tubing this weekend.
This should be enough parts to plumb down and across the front axle.
I picked up a new master cylinder for a 1994 K3500 a couple weeks ago. I need to get a 19/16-18tube nut and some tubing this weekend.
This should be enough parts to plumb down and across the front axle.
Registered User
Joined: Mar 2010
Posts: 7,265
Likes: 1,346
From: Prince George, BC
Thread Starter
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
Registered User
Joined: Mar 2014
Posts: 1,296
Likes: 308
From: PA near Harrisburg
Glad to hear that your wife is doing better! I'm with TC about the RR conversion part numbers. I really appreciate you doing the research on it.
Well...I'm off to play in the snow!
Well...I'm off to play in the snow!
Thread Starter
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
Thread Starter
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
today I bent up a brake line that goes from the master cylinder to the balance valve. I could have done just one but that wouldn't have looked right. So I did the rear today. I needed a 9/16-18 tube nut for the front outlet on my swapped in Chevy master cylinder. The Dodge one was 9/16-20 Oh Really's had to order the right one. should be in tomorrow. I also worked on a little of the plumbing for the HB.
Thread Starter
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
I'll take some tomorrow. I got behind on my Monday routine and didn't get around to taking any. I haven't bolted anything up yet because I want th use an old balance valve in a vice to make the front line follow the shape of the rear easier.(The earlier trucks have the balance valve in the frame)