April at The Ranch
Thread Starter
Chapter President
Joined: Oct 2002
Posts: 4,983
Likes: 1
From: Sedalia, Texas
May not be what you're looking for, but there are some on craigslist.com.
Just curious if anybody knows of a set of rims/tires (preferably new) take offs from any year Honda Rancher ATV? I bought Jana a used 2004 Rancher last year..........runs great but the tires are getting old and one of the rims is bent, causing it to wobble some. (it has been wrecked but I knew that when I bought it) The tires all hold air but I'd like to replace the whole set with new rims/tires...preferably in chrome. Lot's of guys replace them with aftermarket wheels/tires, so if you know of some newish stock, set of takeoffs, please let me know. Thx.
..
..
Registered User
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Lost mine on Sunday. Slow leak....only after warmed up.... made it home with no trouble; radiator down about 3".
It's the factory water pump so can't complain too much, with it lasting 210,000 miles.
Looked it up.... about the easiest mechanical R+R on the Cummins, IMO.
I understand the 3rd Gens have lots of problems with their pumps?
Are they still mounted on front of the engine next to the belt tensioner?
Anyone else had to replace their 2 gen pump.... Charlie, Justin, Wayne?
RJ
It's the factory water pump so can't complain too much, with it lasting 210,000 miles.
Looked it up.... about the easiest mechanical R+R on the Cummins, IMO.
I understand the 3rd Gens have lots of problems with their pumps?
Are they still mounted on front of the engine next to the belt tensioner?
Anyone else had to replace their 2 gen pump.... Charlie, Justin, Wayne?
RJ
Sorry to hear you lost the WP, RJ. But im not aware of them being more trouble prone on 3rd gens than on any other Cummins. Mine is still original, at 154K, FWIW.
It is my understanding they are very easy to replace....2 bolts.
..
Registered User
Joined: Oct 2005
Posts: 2,184
Likes: 0
From: Dallas area
Remove belt.
Remove 2 10m bolts
Remove pump
Now go backwards...
I lost mine about 130k... Maybe had something to do with an air pocket and running the motor at 1500RPM for like a half an hour trying to get the thermostat to open... lol Oops, man that was a while ago... Trying to burp the thing after my head work. Lots better ways to do things now!!
Remove 2 10m bolts
Remove pump
Now go backwards...
I lost mine about 130k... Maybe had something to do with an air pocket and running the motor at 1500RPM for like a half an hour trying to get the thermostat to open... lol Oops, man that was a while ago... Trying to burp the thing after my head work. Lots better ways to do things now!!
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Yup!
Took longer to get new Belt back on than to change pump.NEw belts are a pain without an extra set of hands.
I'm not sure I could get it done on the road. Used an 18" breaker bar w/ a 3/8" adapter to work the belt tensioner.
Surprised....only 18 ft-lbs to retighten.
RJ
Took longer to get new Belt back on than to change pump.NEw belts are a pain without an extra set of hands.
I'm not sure I could get it done on the road. Used an 18" breaker bar w/ a 3/8" adapter to work the belt tensioner.
Surprised....only 18 ft-lbs to retighten.
RJ
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Did not know this till reading up, yesterday....FSM recommends not to run engine while filling.... if that's what you did?
RJ
Registered User
Joined: Oct 2005
Posts: 2,184
Likes: 0
From: Dallas area
No didn't run while filling... Was like 30* outside and filled it up and wanted to get the thermostat to open and circulate so I could top it off if need be. (Don't remember why I didn't just drive it, maybe more parts were off). flipped on exhuast brake and high idle and forgot about it for a while. came back and water pump was screaming! oh well. Only thing I can figure is there was an air pocket in there
oh well. Only thing I can figure is there was an air pocket in there
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Bueler?........ Bueler?
Had work GTG, last Sunday, helping Mike move his shop to south of Paris, TX!
Charlie, Brian, Evan, Mike, myself! two goosenecks, one Propane tank trailer, 4 truck beds full.... in a caravan at 105* on last Sunday.
Big shop (20,000 sg ft.), and knowing Mike, will be very nice place in six months!
Congrats Mike.
Mike, forgot to get some "before" Pics.
RJ
Had work GTG, last Sunday, helping Mike move his shop to south of Paris, TX!
Charlie, Brian, Evan, Mike, myself! two goosenecks, one Propane tank trailer, 4 truck beds full.... in a caravan at 105* on last Sunday.
Big shop (20,000 sg ft.), and knowing Mike, will be very nice place in six months!
Congrats Mike.
Mike, forgot to get some "before" Pics.
RJ
Registered User
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
I can't thank all you guys enough for helping last weekend - we got a lot accomplished... for me, it was the easiest day of the week!
Just finished getting everything out of the old shop an hour ago - hope I die in the new place, 'cause I sure as heck don't ever want to move again!
I'm hosting a LazarSmith grand opening in Pattonville ~ mid-October (everyone's invited).
Just finished getting everything out of the old shop an hour ago - hope I die in the new place, 'cause I sure as heck don't ever want to move again!
I'm hosting a LazarSmith grand opening in Pattonville ~ mid-October (everyone's invited).
Thread Starter
Chapter President
Joined: Oct 2002
Posts: 4,983
Likes: 1
From: Sedalia, Texas
Was glad to do what little I could. Just wish I could have done more.
That is going to one nice facility when you get it set up and going! A lot of concrete enclosed and a lot of concrete under cover.
Looking forward to the "Grand Opening"! (Don't forget about the ODRA, Diesel Roundup on Oct. 15th)
That is going to one nice facility when you get it set up and going! A lot of concrete enclosed and a lot of concrete under cover.
Looking forward to the "Grand Opening"! (Don't forget about the ODRA, Diesel Roundup on Oct. 15th)
Registered User
Joined: Jul 2002
Posts: 2,242
Likes: 16
From: Celina, TX
Congrats on the new shop Mike! If I had known you were on the move the other weekend, I would have come out to lend a hand (or truck).
Since it seems to be a little quiet around here, let's see if we can get some discussion going. The cassette player on my stock radio died, which means no more tape adapter for my iPhone. And since you can't drive more than a couple of miles without having to change the station on an FM transmitter, I'm looking at new stereo setups for the old truck. Any recommendations from anyone? What's a good setup to go with? Not planning on going to Sat radio since I have more than enough music on the iPhone for my trips. Not even that concerned with it controlling my iPhone from the face since my phone is in a cradle at my fingertips anyway. Was thinking about upgrading speakers while I'm at it, especially since I'm not sure how the factory Infinity stuff will work with a new head unit. So let's hear your opinions if you have any!
Since it seems to be a little quiet around here, let's see if we can get some discussion going. The cassette player on my stock radio died, which means no more tape adapter for my iPhone. And since you can't drive more than a couple of miles without having to change the station on an FM transmitter, I'm looking at new stereo setups for the old truck. Any recommendations from anyone? What's a good setup to go with? Not planning on going to Sat radio since I have more than enough music on the iPhone for my trips. Not even that concerned with it controlling my iPhone from the face since my phone is in a cradle at my fingertips anyway. Was thinking about upgrading speakers while I'm at it, especially since I'm not sure how the factory Infinity stuff will work with a new head unit. So let's hear your opinions if you have any!
Registered User
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
Darn!
I figured work had you in Bangladesh or Brno or somewhere...
My opinion on your tuneage dilemma is that your lucky to have a working radio - ever since one of my techs was "troubleshooting" his truck via ECM swaps with everything in sight last year, our silver truck has been sans radio, delay wipers, power locks & the ability to take the Smarty off of #9
Won't solve your problem, but might make you feel better!
I figured work had you in Bangladesh or Brno or somewhere...
My opinion on your tuneage dilemma is that your lucky to have a working radio - ever since one of my techs was "troubleshooting" his truck via ECM swaps with everything in sight last year, our silver truck has been sans radio, delay wipers, power locks & the ability to take the Smarty off of #9
Won't solve your problem, but might make you feel better!
Registered User
Joined: Jul 2002
Posts: 2,242
Likes: 16
From: Celina, TX
Nothing long distance right now. Just weekly trips to Kansas City with 72 hours at home every weekend.
The no delay wipers doesn't seem to be much of an issue right now, but no radio is definitely a problem for long trips with no co-pilot.
The no delay wipers doesn't seem to be much of an issue right now, but no radio is definitely a problem for long trips with no co-pilot.
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
I wouldn't go to Dallas w/o Sirius Radio...... NPR/FOX, CNN TV broadcasts/ Willie's Corner (country classics).
But to answer your question, my Kenwood works well.
Very happy with it. and still using factory speakers.
They work fine, IMO.
RJ
But to answer your question, my Kenwood works well.
Very happy with it. and still using factory speakers.
They work fine, IMO.
RJ
Registered User
Joined: Jul 2002
Posts: 2,242
Likes: 16
From: Celina, TX
We have Sirius in Andrea's car, but even in there I find myself on only a couple of stations. I figure if I get tired of music on my iPhone, I can always use Pandora on my phone running through the truck radio.
Main thing I noticed with the stock speakers is that it seems like all my sound comes through the pillars. I can move the balance to the back, but doesn't seem like I get much output from the front or back doors.
Main thing I noticed with the stock speakers is that it seems like all my sound comes through the pillars. I can move the balance to the back, but doesn't seem like I get much output from the front or back doors.
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Opps, forgot till you jogged my memory!
When I put im the A-Piler gauges I unhooked those speakers.
Sound was weak, so I DID upgrade to after market 4-ways, in the doors.
(From Tony at Sound Center on 1st street in Durant).
RJ
When I put im the A-Piler gauges I unhooked those speakers.
Sound was weak, so I DID upgrade to after market 4-ways, in the doors.
(From Tony at Sound Center on 1st street in Durant).
RJ
