Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

My first 24v got a few ???'s

Old Jan 7, 2008 | 11:30 PM
  #1  
Teddyh28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2008
Posts: 17
Likes: 0
From: Abilene
My first 24v got a few ???'s

Ok ive owned a 12v so im not new to diesels or anything but this is my first 24v.
Ok Whats the most cost friendly CHip that gives me the most power. A dealer here in town sells Bullydogs for 385.00 are those anygood? I also seen the quadzillas cheaper prices on ebay but im guessing you get what you pay for.
I dont Pull alot of heavy loads mostly 20ft car hauler ever now and ide like to enter some local charity sled pulls nothing major, Ok my 12v smoked like a ****
I also GOT to have smoke. ok now you know what im wanting outta a chip now tell me the cheapest best one i can get thall give me that.
Reply
Old Jan 7, 2008 | 11:40 PM
  #2  
displacedtexan's Avatar
Banned
 
Joined: Apr 2005
Posts: 3,337
Likes: 0
From: Place with no quail:(
You know about the fuel pressure issues on the 24v?

You want smoke? Used Edge Comp would be the cheapest route, but remember that we have enough regulations, smog tests, etc
Reply
Old Jan 8, 2008 | 12:16 AM
  #3  
Teddyh28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2008
Posts: 17
Likes: 0
From: Abilene
been reading about that smoker switch, first i ever heard of it anyone have a tech write up or can someone take a pic of the what i need to do? Will it give me any smoke with out chip or anything? Im completly new to 24v's so sorry if my ???'s seem a little dumb.
Reply
Old Jan 8, 2008 | 12:26 AM
  #4  
Teddyh28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2008
Posts: 17
Likes: 0
From: Abilene
Never mind i found a answer to the will it work on a stock truck with no comp box and the answer i found is NO. guess ill search ebay for a used edge.
Reply
Old Jan 8, 2008 | 05:57 AM
  #5  
Ph4tty's Avatar
Registered User
 
Joined: Aug 2005
Posts: 3,465
Likes: 0
From: fredericksburg, virginia
Guages and a lift pump upgrade would be a good start. Plenty of deals in DTR classifieds for boxes and such.
Reply
Old Jan 8, 2008 | 07:48 AM
  #6  
91rangerturbo's Avatar
Registered User
 
Joined: Dec 2006
Posts: 839
Likes: 0
From: Greenville, IN
You going to need some injectors and a good wire tap box to get smoke from a 24valve.

First thing is first
auto or manual? Going to need to build it to hold the extra power.
Check your fuel pressure and verify your lift pump is up to par.
Reply
Old Jan 8, 2008 | 01:01 PM
  #7  
Scott07's Avatar
Registered User
 
Joined: Nov 2006
Posts: 97
Likes: 0
Or a Smarty....makes them smoke pretty good.
Reply
Old Jan 8, 2008 | 09:54 PM
  #8  
psd tuner's Avatar
Registered User
 
Joined: May 2007
Posts: 363
Likes: 0
From: Southeast, Texas
agreed smarty is very nice. good smoke off idle but clears up after turbo kicks in usually after 5psi
Reply
Old Jan 8, 2008 | 10:11 PM
  #9  
BBA's Avatar
BBA
Registered User
 
Joined: Jan 2007
Posts: 709
Likes: 0
From: Sulphur Springs, Tx
On the quadzilla part I dont think its one of the you get what you pay for rules. I know alot of people than run quadzilla and really like it I know I do. If you want to wait on the adrenaline its going to be mean!
Reply
Old Jan 9, 2008 | 09:25 PM
  #10  
Teddyh28's Avatar
Thread Starter
Registered User
 
Joined: Jan 2008
Posts: 17
Likes: 0
From: Abilene
Just had to get the lift pump changed this morning aint a *****.
Reply
Old Jan 9, 2008 | 10:11 PM
  #11  
IntakeRacing's Avatar
Registered User
 
Joined: Dec 2004
Posts: 451
Likes: 0
From: Fort Nel$on
Originally Posted by 91rangerturbo
You going to need some injectors and a good wire tap box to get smoke from a 24valve.

First thing is first
auto or manual? Going to need to build it to hold the extra power.
Check your fuel pressure and verify your lift pump is up to par.
i had chip only and it smoked like a pig outa the hole with the van aaken

injectors just make it smoke more!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dodgediesel1969
12 Valve Engine and Drivetrain
3
Nov 5, 2010 09:53 AM
bansh-eman
3rd Generation Ram - Non Drivetrain - All Years
15
Sep 21, 2009 11:11 AM
97CTD
Performance and Accessories 2nd gen only
4
Jul 29, 2007 08:22 AM
GoodoleBob
3rd Generation Ram - Non Drivetrain - All Years
4
Sep 27, 2006 11:37 PM
Cowboy_Customs
1st Gen. Ram - All Topics
9
Mar 30, 2006 06:03 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:29 AM.