I know theres a port but what adapter do I need to hook up my edge fuel pressure sender to the FASS fuel port?

 

someones gotta have a fass and an edge ....

do i extend the wires for the fuel pressure sensor all the way back to the fass or is there some kind of T that i can buy for it up front?

 

I put mine about 12" from my VP in the feed line from the FASS. I wanted to know what my VP was getting. Used a "T" fitting and needle valve.

 

where did you get the 3/8 press fit T? what size is the pressure sensor fitting?

 

I got a barbed fitting from Home Depot. The blue line worked like a charm. I put clamps on just in case. The fitting had barbes on the ends and a compression fitting on the other. Come on over. We'll git er done.

 

you wouldnt happen to have a part number would you, im fixing to run to home depot now and that would probably speed up the searching.

Thanks!

 

I sure don't. I just took a small piece of my blue line with me and got one that it fit and also had the compression fitting.