I was thinking on grinding my stock plate to a 0 plate anyone know the specs on what to grind it to?

 

Just grind it flat from the deepest point all the way up and down and that will make it a 0.

 

Thanks smokindodge I can do that. I just would like to see how much of a difference it would be, Just something to play with

 

big differance, but lots of low rpm smoke

 

Change to Don M injectors.

I'm using Mach 3's tuned to be > 370's ... less smoke than 300's. Smoke is now @ WOT. It's a wonderful thing for tailgaters.

 

Where would I find these injectors and how much hp would I gain??

 

yo Don buddy ...

 

Here's my post from earlier this week on the same topic:

I think you may have better luck contacting DonM's resellers directly. I believe Rip Rook and Rod @ Wildcat Diesel are both distributers and can answer any questions you may have.

Rod: www.wildcatdiesel.com

Rip Rook: http://www.protintnw.com/sa-main.htm

brandon.