Stutter (Miss) and Cut Out
#1
Registered User
Thread Starter
Join Date: Jun 2004
Location: West TN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Stutter (Miss) and Cut Out
My 02 (108000 miles) has developed a slight stutter when I accelerate. I am getting P0236 code. I have seen different explanations for this code (does anyone know what it means?). I have new LP and VP44 (9K miles ago). I have fuel pressure gauge but have yet to install. I am going to change fuel filter this afternoon. I did have a K and N filter but I removed this after fear of oil in system. I have also noticed that the truck would sort of buck (cut out) at about 2200-2500 RPM under hard acceleration (been doing that for some time). Any thoughts and suggestions would be appreciated.
#2
Registered User
Join Date: Nov 2002
Location: outside of Duluth MN
Posts: 1,234
Likes: 0
Received 0 Likes
on
0 Posts
For the code meaning go here: https://www.dieseltruckresource.com/...n&onlynewfaq=1 It is possible the wastegate is sticking or stuck.
For the rest of it, Sounds to me like you need to check fuel pressure ASAP.
Tom
For the rest of it, Sounds to me like you need to check fuel pressure ASAP.
Tom
#3
Registered User
cutting out of engine
I hope that it isn't what I have but it might be a bad signal to the vp-44. If so please pm me . Corrupted signals. are too complicated for the re&re's
Thread
Thread Starter
Forum
Replies
Last Post
stock600
12 Valve Engine and Drivetrain
14
02-25-2008 11:21 AM