Friend installed a bullydog powerpup on a 2004 2500 6 speed and the powerpup was for a 2004.5-2005 and the truck will not statr and is stuck at a gas station. the powerpup will not let it go into recovery mode it says error in sector1

 

If he is at a gas station I would assume that means it drove for a while. Any idea if it was showing any symptoms while he was driving?

 

No hey did not drive it for a while he thought it would be a good idea to install it at the gas station

 

Freinds should not let friends drive while doing thoughtless things, Being politcally correct here I hope.

 

round-about way of getting there,,but,,,,,,go to 3rd gen performance forum,,,,,scroll back to page 20.......problems with downloaders thread......scroll through to 04ctd reply and his link to his thread on his ordeal with bullydog .......best read on problem like youre having ive read on here...................bama

 

To get up and running quickly, disconnect and remove the fueling box you installed, and then leave the negative battery cables disconnected for an additional 20 minutes. This will default the truck's computer back to its OEM settings.

Reconnect the batteries and the truck should start unless you have permanently damaged the PCM.

Because the 04.5 and newer Cummins uses a totally different controller map to handle the different style turbo used on the later engines, the box you installed will not work.