HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

loud metallic clicking in 4WD

Thread Tools
 
Search this Thread
 
Old Jul 13, 2007 | 03:26 PM
  #1  
jeezul's Avatar
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 4
Likes: 0
loud metallic clicking in 4WD

I have a 2003 Dodge Ram 2500 4x4 Quadcab. Last time i put it in 4WD I heard a loud metallic clicking noise. I think it's coming from the drivers side. It happens more than once during a single tire rotation and doesn't change if I'm turning the wheel or accelerating. Every thing seems in 2WD. I really don't have a clue so any ideas are much appreciated.
Reply
Old Jul 13, 2007 | 05:02 PM
  #2  
monnshyne's Avatar
Registered User
 
Joined: Sep 2006
Posts: 212
Likes: 0
From: Middletown In.
Does your axles turn while not in 4wd (IE lockin lockout hubs on it)? If not it could be a u-joint and may still could be from the sounds of it. Without alot more detail.
Reply
Old Jul 14, 2007 | 08:34 AM
  #3  
FMB's Avatar
FMB
Registered User
 
Joined: Apr 2005
Posts: 1,222
Likes: 69
From: Old Norte Mexico
Welcome to DTR, jeezul. When my '03 started the click-click-click, it was real noticable when driving next to the cement center devide on the highway. It would click slowly when I drove slowly and faster when I drove faster. (for those of you that haven't experienced a 'go-slow', here in the Bay Area you can go all sorts of speeds in the 'fast' lane on the freeway)

IIRC, it was around 72k miles and was my lifetime lubricated front U-Joint on the driver's side. Apparently, the lifetime was over as there was nothing but dust in the joints. Replaced both fronts with Spicers I think, that are greasable. I'm at 123k now.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mick-e
1st Gen. Ram - All Topics
11
Sep 4, 2012 06:18 PM
Timberman
24 Valve Engine and Drivetrain
7
Aug 18, 2010 02:46 PM
nvr-enuf
3rd Gen Engine and Drivetrain -> 2003-2007
3
May 15, 2010 09:43 PM
One Way
3rd Gen Engine and Drivetrain -> 2003-2007
12
Mar 30, 2009 09:12 AM
sgadd
12 Valve Engine and Drivetrain
4
Mar 8, 2008 11:35 AM




All times are GMT -5. The time now is 08:31 PM.