HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

Campaign pump still sucks low FP

Old Dec 22, 2006 | 08:18 PM
  #1  
Fullsizeyota's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 49
Likes: 0
Campaign pump still sucks low FP

i had a hunch my old factory LP was shot.. it didn't ever die, but it had 150K miles on it, i decided i was pushing my luck

i went to the cummins dealer and bought a campaign pump.

truck has never had a problem

i checked my FP via the schrader valve on the IP. it's at a steady 10PSI when idling, but with the truck parked (no load) i can rev it up and drop the PSI to about 2.

motor is stock except a edge box.. any ideas??? i'm heading on a 700 mile round trip sunday night...
Reply
Old Dec 22, 2006 | 10:02 PM
  #2  
glenn-k's Avatar
Registered User
 
Joined: Oct 2006
Posts: 228
Likes: 0
From: Mariposa, CA
Hows your fuel filter?
Reply
Old Dec 22, 2006 | 10:07 PM
  #3  
glenn-k's Avatar
Registered User
 
Joined: Oct 2006
Posts: 228
Likes: 0
From: Mariposa, CA
Also - if you go to the User CP button above and fill out your signature, year, model, mods etc, it will help others to know what you have and help you better.
Reply
Old Dec 23, 2006 | 09:10 PM
  #4  
D2 Cat's Avatar
Registered User
 
Joined: Jun 2006
Posts: 428
Likes: 0
From: south of Kansas City 40 miles
Might try another gauge also, they're not infallible.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
supr
24 Valve Engine and Drivetrain
34
Nov 2, 2010 04:45 PM
redpoint5
24 Valve Engine and Drivetrain
6
Mar 26, 2009 08:54 PM
SSweeney
24 Valve Engine and Drivetrain
12
Sep 3, 2007 01:09 PM
wesgib
24 Valve Engine and Drivetrain
19
Dec 20, 2006 01:31 PM
dingoe
24 Valve Engine and Drivetrain
26
Nov 12, 2006 11:28 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:00 AM.