Stock 600 Dyno results
Stock 600 Dyno results
I ran the new truck on the dyno (dynojet) today in totally stock configuration with 413 miles on the clock ... 3500 SRW 6-speed
Best run was 270.2 HP / 477.6 TQ
The torque reading is off because for some reason the pickup wouldn't read right. 477.6 was the only reading out of 6 runs! .... we tried taping the damper to no avail ... best we could figure was the paint is new and shiney interfering with the photocell ... didn't want to hold the dyno up anymore trying to get a reading ... we were going to paint it flat black ... wait for it to dry and try again .... but as I said ... didn't want to hold up the show ...
Best run was 270.2 HP / 477.6 TQ
The torque reading is off because for some reason the pickup wouldn't read right. 477.6 was the only reading out of 6 runs! .... we tried taping the damper to no avail ... best we could figure was the paint is new and shiney interfering with the photocell ... didn't want to hold the dyno up anymore trying to get a reading ... we were going to paint it flat black ... wait for it to dry and try again .... but as I said ... didn't want to hold up the show ...
Congratulations Keith!!
Those look like pretty good numbers for your new one.
Just think,... if you had run on Diesel Dynamics Dynojet
you might have had 400 H.P. and 900 Torque!!
---------
John_P
Those look like pretty good numbers for your new one.
Just think,... if you had run on Diesel Dynamics Dynojet
you might have had 400 H.P. and 900 Torque!!
---------
John_P
Keith you have a dyno at your shop? 3rd gens are nice trucks the ride, brakes and steering are just unbelievable comparing them to older trucks. Glad to see you added to your stable. Take care Tim
It will get better with time. We have a stock 03 HO here we tested at 278 and 279 HP back to back after it had 25K on the clock. DynoJet, of course.
Glad you got a new truck Keith!!!!!!
As soon as the 04.5 gets here I will dyno it and report back what it does stock and with the new custom injectors
Don~
Glad you got a new truck Keith!!!!!!
As soon as the 04.5 gets here I will dyno it and report back what it does stock and with the new custom injectors
Don~
John,
I said the same thing at the dyno. That would have put down way more out west.
Keith, Whats that sound, oh no, its flying electrical tape!
Nice #s out of the box!
Don- the injectors are impressive to say the least!
I said the same thing at the dyno. That would have put down way more out west.
Keith, Whats that sound, oh no, its flying electrical tape!
Nice #s out of the box!Don- the injectors are impressive to say the least!
I saw a new 600 run 240 hp on a very stingy Mustang dyno on Saturday. The truck was a 4X4 srw 6 speed with very few miles on it.
Everyone was seeing low numbers, and I think my hp was down about 10% from what I would expect on a Dynojet.
Boyd.
Everyone was seeing low numbers, and I think my hp was down about 10% from what I would expect on a Dynojet.
Boyd.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
crewcabxlt
1st Gen. Ram - All Topics
34
Jul 3, 2009 05:15 PM
pwerwagn
Natl. and Regional Chapters / Special Events
2
Feb 28, 2007 03:18 AM
CTDHokie
3rd Gen High Performance and Accessories (5.9L Only)
35
Aug 20, 2004 04:53 PM
Dave04600
3rd Gen High Performance and Accessories (5.9L Only)
3
May 22, 2004 03:00 PM




