well went to bodyshop today to yank turbo off asnd whole front is off truck due to a couple of deer that didnt want to share the road. Anyway as I was under truck removing oil drain bolt on turbo I saw motor mount on passengers side was trashed was in a 45 degree angle and drivers side was tweaked also. So was this a result of the accident or was this a normal problem on modified truck or was this due to last trip to track when front drivers wheel lifted off the ground and I snapped drivers side cv joint twisted passengers side cv joint bent drivers axle and blew axle seals. Do they make upgraded mounts and also what about a motor/strut brace

 

Front wheel lifted off the ground?

These are the only mounts that I know of,you could also chain the motor down.

http://www.thecarlisuspension.com/do...tormounts.html

 

those are the only ones I have heard about too, how much?

 

chaining works wonders.

 

Yeah found carli's right after post gonna order tomorrow might have to look into fabing one up

 

Pictures of getting the front end off the ground would make it more believable.

 

if i remember right, they are a little spendy...

 

well it hopped off the ground and bucked launching at 35psi according to 2 people watching and thats when all the damage happened 3000.00 bill I didnt mean for it to act like it was a 67 camaro with 900hp standing up waving the first 60ft. I am gonna call tomorrow bout them

 

fab 2 up one for each side.

 

No I was talking bout fabing up a brace I am not messing with mounts the only fabing on them will be the story I tell my wife how they could have magically got twisted.