code question
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Small town, Northern Utah
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
code question
My buddy has an 05 6 speed with about 12000 miles on it. This morning driving to work all of the gauges went out down to zero and a code came up NOPU 5. We did the cycle the key off and on 3 times to pull any codes and there is nothing in the computer????????? He just had the dealer change all the fluids and filters while it was in for the imfamous hard start problem (for the 3rd time) and they replaced the camshaft sensor. I climbed under it and couldn't see any loose wires or connectors but didn't see any. Wondering if any one else has seen this. PLEASE HELP.
#2
Registered User
Join Date: May 2006
Location: MESQUITE TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Camshaft Plug
Have Ya Got Her Fixed Yet.
I Replaced My Camshaft Sensor And It Worked Great For 10 Minutes.
Found One Of The Pins Were Pushed Up And Only Making Contact Sometimes. But You Should Have Some Codes. Is The Check Engine Light On?
I Replaced My Camshaft Sensor And It Worked Great For 10 Minutes.
Found One Of The Pins Were Pushed Up And Only Making Contact Sometimes. But You Should Have Some Codes. Is The Check Engine Light On?
Thread
Thread Starter
Forum
Replies
Last Post
O.T
3rd Gen High Performance and Accessories (5.9L Only)
2
09-06-2007 06:10 PM
CTD NUT
Performance and Accessories 2nd gen only
2
04-05-2005 04:45 PM