were 342 gears offered in 07 on up duallys?
For what its worth the anwser to your other thread that is gone is that there are no 3.54 gears after 02. The only gears available for the AAM axles (03-present) are 3.73 that you claim to have and the 4.10s. So you wont find anyone taking you up on the offer to trade axles.
actually, I never said a word about 355 gears, I asked about 342 gears which "are" currently available and come standard in all new dodge diesel pickups including the 3500 dually trucks as you can see by clicking here---->>http://www.dodge.com/hostc/bmo/powertrain.do
3:42's are available, I have them in my 09 4x4 dually 6-speed manual.
Supersonictoys, if it is a direct bolt-in and all the parts are the same I would be interested in a swap.
I use my truck commercially and for the heavier loads I haul (30K+ GVWR) the 3:42 gears just don't quite cut it.
Where are you located?
Supersonictoys, if it is a direct bolt-in and all the parts are the same I would be interested in a swap.
I use my truck commercially and for the heavier loads I haul (30K+ GVWR) the 3:42 gears just don't quite cut it.
Where are you located?
Trending Topics
I am actually in sacramento california and should have every tool here to do the swap. I know its a drive but do you ever come up this way or have you ever wanted to take a trip to san fransisco?? LOL its only about 90 miles away! ideally closer would be better but maybe we can still work something out. you have a p.m
with the 6.7 and the G56 what is an ideal gear ratio for grossing out at 26k. I tow a goosneck dump trailer, so my truck will be used half the time to haul and the other half empty (looking at jobs, family time etc) the truck in question willl be a 3500 c&c. thanks
Thread
Thread Starter
Forum
Replies
Last Post
cminzey
3rd Gen Engine and Drivetrain -> 2003-2007
8
Jun 24, 2008 09:17 AM



thanks.
