47RE same band torque as 48RE?
Thread Starter
Registered User
Joined: Feb 2006
Posts: 2,280
Likes: 10
From: Udaho
47RE same band torque as 48RE?
I noticed in my '03 shop manual that there is no section for the 47RE.
I'm adjusting the kickdown and reverse bands as part of my 30,000 mile service (please spare me the lecture on not needing it, I want to do it "by the book", and the book says to adjust them).
The torque specs given for the 48RE adj. screw (72 in/lb) should be the same as for the 47RE you'd think, right?
Thanks in advance!
I'm adjusting the kickdown and reverse bands as part of my 30,000 mile service (please spare me the lecture on not needing it, I want to do it "by the book", and the book says to adjust them).
The torque specs given for the 48RE adj. screw (72 in/lb) should be the same as for the 47RE you'd think, right?
Thanks in advance!
Registered User
Joined: Dec 2002
Posts: 1,055
Likes: 0
From: East Montpelier, VT.
Yes, it is the same. Just remember it is INCH/pounds, not your typical Foot/pounds. That wouldn't make a good day if you did Foot/pounds.
Now, only to find a good trusting INCH/pounds torque wrench. I had a cheapy and it worked once but didn't dare trust it again.
Now, only to find a good trusting INCH/pounds torque wrench. I had a cheapy and it worked once but didn't dare trust it again.
Thread
Thread Starter
Forum
Replies
Last Post
J Lent
Performance and Accessories 2nd gen only
60
Nov 3, 2009 09:14 PM
Redline Ram
3rd Gen High Performance and Accessories (5.9L Only)
7
Apr 28, 2009 09:08 PM
~Angry Tractor~
12 Valve Engine and Drivetrain
10
Jan 12, 2007 01:32 PM
j
Performance and Accessories 2nd gen only
5
Nov 3, 2003 09:03 AM