4" Exhaust Elbow on 03 305/555 Motor
4" Exhaust Elbow on 03 305/555 Motor
Anyone done this switch over ? 03's have a 3.5" dia on the exhaust side of the elbow. I'm getting ready to install a 4" elbow off a 2005. Can the V-band camp be reused on the turbo side of the elbow ? I know the exhaust side needs a new one. PN I have from Dodge is 52121285AA for $22.00 for the exhaust side.
The turbo side V-band clamp is PN 5159965AA for $78.00
Wondering is I can save $78 buck and reuse this clamp. No idea why this clamp would cost this much money.
Thanks
The turbo side V-band clamp is PN 5159965AA for $78.00
Wondering is I can save $78 buck and reuse this clamp. No idea why this clamp would cost this much money.
Thanks
Trending Topics
I did this but I also put an HE351 turbo on my truck at the same time. Honestly, as annabelle has already stated, it's really not worth the hassle if you are running stock. I doubt you will see any gain at all except maybe a slight decrease in EGTs.
I need a new exhaust system anyway. I have a 4" stainless turbo back sitting in the garage already. Picked up a used 4" elbow and my son already welded a nice bung on it and had it ceramic coated for me
so I'm ready to go.
Can someone help me with which PN is correct ? Dodge dealership tells me what is shown in the pdf but the price seems wrong. They say the turbo side is $75 and the downpipe side is $25. Do they have this backwards ?
Take a look and help me out
Thank you
so I'm ready to go. Can someone help me with which PN is correct ? Dodge dealership tells me what is shown in the pdf but the price seems wrong. They say the turbo side is $75 and the downpipe side is $25. Do they have this backwards ?
Take a look and help me out
Thank you
Thread
Thread Starter
Forum
Replies
Last Post
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
Oct 11, 2007 04:20 PM
gullydog
3rd Gen High Performance and Accessories (5.9L Only)
3
Aug 22, 2004 09:34 PM
03CumminZ4X4
3rd Gen Engine and Drivetrain -> 2003-2007
11
Apr 8, 2004 04:58 PM



