2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

My death wobble has gone to the next level!!!!!

Old May 28, 2007 | 08:35 PM
  #1  
Camarogenius's Avatar
Thread Starter
Registered User
 
Joined: Feb 2007
Posts: 73
Likes: 0
My death wobble has gone to the next level!!!!!

From what I've read, there are a few different kinds of death wobble. Well it happened to me today, and kept happening at only 15 miles per hour! Now, I can turn my steering wheel 360 degrees before the truck responds.
Where do I start? Steering box?
Reply
Old May 28, 2007 | 10:48 PM
  #2  
Camarogenius's Avatar
Thread Starter
Registered User
 
Joined: Feb 2007
Posts: 73
Likes: 0
Anybody home?
Reply
Old May 28, 2007 | 11:08 PM
  #3  
TheBigNasty's Avatar
Banned
 
Joined: Feb 2006
Posts: 1,048
Likes: 0
From: Central "By God" Texas
That is pretty nasty. Only thing that I would think that would make that bad of slop would be the box.

Sounds like it is time to spend some money and fix the DW.
Reply
Old May 28, 2007 | 11:09 PM
  #4  
westcoaster's Avatar
Registered User
20 Year Member
 
Joined: Oct 2002
Posts: 476
Likes: 33
Nope, everyone's gone to bed....


Could you explain the part about turning the wheel 360* before the truck reponds?

Sounds like you need to crawl under there while someone is turning the wheel to see where the slack is.


Edit: when it rains it pours. Nothing, then two guy's post at the same time....
Reply
Old May 29, 2007 | 08:38 AM
  #5  
Mopar1973man's Avatar
Registered User
 
Joined: Apr 2004
Posts: 2,148
Likes: 0
From: New Meadows, Idaho
First off try this...
http://dodgeram.info/tsb/1997/19-10-97.htm
Reply
Old May 29, 2007 | 10:12 AM
  #6  
Captain's Avatar
Registered User
 
Joined: Jul 2002
Posts: 904
Likes: 0
From: Bucks county PA
sounds like your trac bar isnt even connected anymore.
Reply
Old May 29, 2007 | 11:38 AM
  #7  
Diesel Dave2's Avatar
Pickin on the wrong admin...
 
Joined: Mar 2007
Posts: 3,568
Likes: 1
Yep...We need more details....Or some how the gear is shot in the box...That would be rare...
Reply
Old May 29, 2007 | 11:49 AM
  #8  
Barry St John's Avatar
Registered User
 
Joined: Apr 2005
Posts: 279
Likes: 0
From: Northport, Wa
Whatever it is you should be able to see it. Just have someone turn the wheel while you look at your steering. The problem will be obvious. Good Luck.
Reply
Old May 29, 2007 | 03:56 PM
  #9  
Camarogenius's Avatar
Thread Starter
Registered User
 
Joined: Feb 2007
Posts: 73
Likes: 0
Originally Posted by Captain
sounds like your trac bar isnt even connected anymore.
We have a WINNAH!!!!
The bolt holding it to the front axle is gone bye bye. New bolt and bushing will be in tomorrow morning.
Reply
Old May 29, 2007 | 08:43 PM
  #10  
tony597fitter's Avatar
Banned
 
Joined: Oct 2006
Posts: 331
Likes: 0
You should get a poly bushing so it doesnt do that again.
Reply
Old May 29, 2007 | 08:46 PM
  #11  
Camarogenius's Avatar
Thread Starter
Registered User
 
Joined: Feb 2007
Posts: 73
Likes: 0
I want to/ hope I did, but I ordered whatever the parts monkey could get in by 8:00 am. When this truck sits I lose money.
The bushing he's getting in said "Two peice design, so I think it may be poly. (I hope so!!!)
Reply
Old May 30, 2007 | 08:03 AM
  #12  
turbo diesel's Avatar
Registered User
 
Joined: Oct 2006
Posts: 19
Likes: 0
Trac Bar

Check your trac bar.... If you need a new one don't buy stock will just wear out again they are junk
Reply
Old May 30, 2007 | 11:48 AM
  #13  
Barry St John's Avatar
Registered User
 
Joined: Apr 2005
Posts: 279
Likes: 0
From: Northport, Wa
Also take a good look at the bolt hole. When they come loose they tend to oval the hole which will then cause the bolt to loosten up and give you trouble down the road. Not hard to fix but can be the cause of recurring death wobble later. Good luck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
725Gus
4th Gen Ram -Non Drivetrain- 2010 and Up
12
Mar 6, 2014 09:49 AM
Trooperthorn
1st Gen. Ram - All Topics
6
Nov 30, 2010 12:06 AM
tands1000
3rd Gen Engine and Drivetrain -> 2003-2007
66
Dec 6, 2008 12:30 PM
kofaram
3rd Gen Engine and Drivetrain -> 2003-2007
10
Feb 8, 2008 09:36 PM
Jezzhuntin
3rd Gen Engine and Drivetrain -> 2003-2007
3
Apr 11, 2007 04:52 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:01 AM.