Strange behavior
02-14-2015, 03:15 PM
#76
Registered User
Around the middle of this webpage you'll find the instructions on how to jump the VP which will let you know if its at least functioning. VP44 Diagnostic
Bluechip is a good VP source but they're the most expensive too. Ol' Chip who used to run that place was quite knowledgeable about the VP and contributed to a lot of its upgrading. That said, they need to update their website because some of the information is a little conflicting of what we (and they) have learned over the years. But nonetheless, its still a good source of info.
Here's a list of companies who not only sell but rebuild the VP. Of that list, I've only heard good things about Industrial Injection. Mopar1973Man's Dodge Cummins Articles - Bosch Certified VP44 Injection Pump Rebuilders
Bluechip is a good VP source but they're the most expensive too. Ol' Chip who used to run that place was quite knowledgeable about the VP and contributed to a lot of its upgrading. That said, they need to update their website because some of the information is a little conflicting of what we (and they) have learned over the years. But nonetheless, its still a good source of info.
Here's a list of companies who not only sell but rebuild the VP. Of that list, I've only heard good things about Industrial Injection. Mopar1973Man's Dodge Cummins Articles - Bosch Certified VP44 Injection Pump Rebuilders
02-14-2015, 04:05 PM
#77
Registered User
Thread Starter
Wow, that's quite a list. Reading the other symptoms I've seen before it died, I got the bad feeling the pump is DOA.
05-02-2015, 06:18 PM
#79
Registered User
Thread Starter
Replaced the Injection pump. Had some anomalies that cleared up later. It's running fine now.
Thread
Thread Starter
Forum
Replies
Last Post
Patrick Campbell
Performance and Accessories 2nd gen only
1
07-08-2005 07:51 AM
rattle_rattle
Performance and Accessories 2nd gen only
4
12-15-2003 02:59 PM