P-pump 24v injector question
Thread Starter
Registered User
Joined: Dec 2003
Posts: 605
Likes: 0
From: Just Moved To COLUMBUS, OH
P-pump 24v injector question
I have a p-pump 24v with a CDS 913 pump and .095 lines. An air dog 165, and industrial injection 64mm charger 26* timing.
which injectors would work best. right now i have the original injectors in the motorn and it fuels all the way through 4300rpm and gets toasty hot... 2/3 pedal in 4th will burry the 1500* pyro by 2400rpm...
I think that i may have a bad injector due to the intense white smoke when its cold idleing... these injectors have not been adjusted for the proper pop off pressures
which injectors would work best. right now i have the original injectors in the motorn and it fuels all the way through 4300rpm and gets toasty hot... 2/3 pedal in 4th will burry the 1500* pyro by 2400rpm...
I think that i may have a bad injector due to the intense white smoke when its cold idleing... these injectors have not been adjusted for the proper pop off pressures
Thread
Thread Starter
Forum
Replies
Last Post
king5335
Performance and Accessories 2nd gen only
26
Jan 17, 2010 07:57 PM
R.O.D.P.99
Performance and Accessories 2nd gen only
1
Jun 30, 2008 11:25 PM
TJ0993
HELP!
1
Nov 8, 2007 10:27 AM