I am up under the truck doing my kingpins and noticed my sway bar is basically dangling. The hardware connecting the bar to the axle rusted so much it broke, I hate salt....

Does anyone know where I can get new hardware for the front sway bar? It seems there are plenty of sources for the bushings but not the hardware. Any thoughts?

 

well a lot of them didn't have sways so you would be fine just removing the cancerous mess. Other than that I think you can still get bushings and hardware but I can't cite a source ATM.

 

I think NAPA will have what you are looking for. I bought mine there.
GW

 

im thinking napa. just check there siteor make ur own

 

I was just at Napa and they threw their arms up. They only have the bushing kits...

I am going to keep searching...

 

All I could find for mine was bushing kits, I was missing the drivers side link... My plow bracket was in the way of removing it in one piece, so I cut the sucker in half and threw it away... LOL
I've only ever owned one other leaf sprung truck with a sway bar at all, and quite frankly they don't make that much difference.

 

Anyone know of a disconnect option?

 

The Dodge dealer can get you what you need.

 

The d(st)ealer, you are killing me. Dave you always have great alternatives.

 

Sometimes they have you over a barrel and you gotta just grin and bear it.

 

try this http://www.energysuspension.com/pages/swaybbct.html you get the mounts and the straps. you can get then from Summit or Jegs I think they are about $20 for the set just measure your bar and order the one you need

 

This could work. I will let you know...

Thanks!