1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

New to the first Gen. Dodge

Old Nov 24, 2007 | 09:17 PM
  #1  
jeramy125's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 30
Likes: 0
From: Friendswood,TX
New to the first Gen. Dodge

First off i'll just say that this is my first diesel truck i've ever owned. 91 D250 single cab long bed. I dont know too much about them because everyone i know can afford new ones. I'm trying to figure out if there is any way i can lift it. Not a whole lot, but maybe enough to get 33x12.50s under it. I cant find anyone who makes a lift kit for it but was wondering if any of you guys might know how, or if it can be done. Its pretty much stock so I would like to start doing some mods to it. Also the odometer, speedometer, and fuel gauge do not work. Just wondering if its the cluster thats fried or if it is each indivual part. Thanks for any tips.
Reply
Old Nov 24, 2007 | 09:21 PM
  #2  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
Check to see if the VSS is still attached to the trans. They have a tendency to loosen up, but luckily there is a crossmember right below the VSS so it may just be laying on there. No VSS signal will kill the speedo/odo/cruise. Fuel gauge is likely the sending unit.

There's info in the sticky about leveling a 2wd.
Reply
Old Nov 24, 2007 | 09:27 PM
  #3  
jeramy125's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 30
Likes: 0
From: Friendswood,TX
Yea,that was what I checked and its tight. I've had this truck for about 4 months and at first the speedowmeter was reading too fast. I had my wife follow me in her car and when it said i was doing 55mph, she said i was doing 35mph. when i was doing 100mph, she said i was really doing 70mph.
Reply
Old Nov 24, 2007 | 09:30 PM
  #4  
jeramy125's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 30
Likes: 0
From: Friendswood,TX
Then about a week ago it quit all together. the odometer has never worked though. it says there is only 59000 miles on it but i know better.
Reply
Old Nov 24, 2007 | 09:31 PM
  #5  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
The speedo error sounds like you are missing the ratio adapter (little "L" shaped gear box between the trans and the VSS).

As far as it not working at all now: Check to make sure the VSS and/or the drive gear are not stripped out. They use a square drive like a speedo cable and those get rounded off after a while.
Reply
Old Nov 24, 2007 | 09:34 PM
  #6  
jeramy125's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 30
Likes: 0
From: Friendswood,TX
Thanks for the tip.
Reply
Old Nov 25, 2007 | 05:46 PM
  #7  
jeramy125's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 30
Likes: 0
From: Friendswood,TX
Ok. The plastic part of the drive gear is stripped out pretty bad on the speedometer. Any idea how much one of these cost, and do i have to get that from a dealer? Oh, and the small gear for the odometer was stripped causing the other problem. Thanks for the info.
Reply
Old Nov 26, 2007 | 04:26 PM
  #8  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
Yep, that's a dealer part.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mknittle
1st Gen. Ram - All Topics
16
Mar 3, 2014 09:04 AM
209trucker
1st Gen. Ram - All Topics
15
Sep 28, 2013 07:06 PM
penguinman
1st Gen. Ram - All Topics
200
May 7, 2012 05:02 AM
rascal
1st Gen. Ram - All Topics
4
Aug 23, 2011 07:22 PM
MikeThomas
1st Gen. Ram - All Topics
2
Feb 12, 2007 05:51 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:58 PM.