mix & match
Thread Starter
Registered User
Joined: May 2006
Posts: 126
Likes: 0
From: southeast Oklahoma
mix & match
I have two trucks that I would like to put together be one very good truck
I have a '91 250 with a highly modded,very strong running motor, new Getrag, new rear end, and new flatbed, but has totally wrecked body
I also have a '89 350, single rear wheel, that has a somewhat worn out motor, slushbox auto tranny, and a fairly straight body
what do yall think I should put together to make one good truck?
I have a '91 250 with a highly modded,very strong running motor, new Getrag, new rear end, and new flatbed, but has totally wrecked body
I also have a '89 350, single rear wheel, that has a somewhat worn out motor, slushbox auto tranny, and a fairly straight body
what do yall think I should put together to make one good truck?
Registered User
Joined: Apr 2006
Posts: 321
Likes: 0
From: Charlotte
I'd just take the body from the '89 and put it on the '91 and be done with it...
if the 350 was a DRW, I'd consider a swap...but the '91 sounds like it has good running gear...plus, it's not an auto...
Greg
if the 350 was a DRW, I'd consider a swap...but the '91 sounds like it has good running gear...plus, it's not an auto...
Greg
Thread
Thread Starter
Forum
Replies
Last Post
jb903
3rd Gen High Performance and Accessories (5.9L Only)
30
Dec 7, 2006 04:42 PM
jaxworks
Performance and Accessories 2nd gen only
18
Jan 31, 2006 01:50 PM
JohnnyH
3rd Gen Engine and Drivetrain -> 2003-2007
5
Apr 11, 2005 06:05 PM
ddestruel
24 Valve Engine and Drivetrain
11
Jan 12, 2005 12:19 PM
