Master cylinder questions
#1
Registered User
Thread Starter
Master cylinder questions
Almost every 1st gen hood I look under I notice a leaking brake master cylinder, including mine. Was there a fix/upgraded cover for this? Oh yeah, by the way...I had posted a topic on an annoying leak of mine a few months ago. This was right around the bell housing area. You all coached me and let me know it was the rear main seal, and sure enough, when I had the tranny and flex plate undone all I could see of the old rear main seal was the bare metal rings that surround/reinforce the seal, w/o any of the rubber material left. Yes, at the point of repair, it was leaking like an 8" round puddle for every 5 minute stop. Anyway, thanks for all the advise. Carmyne
#2
Adminstrator-ess
You should be able to get a new cover. Might want to just replace the whole thing, they are pretty cheap. When I bought mine last year it was $25 with a $20 core charge.
Thread
Thread Starter
Forum
Replies
Last Post
Gen414
3rd Gen Engine and Drivetrain -> 2003-2007
2
05-07-2009 11:08 AM
cgmorgan06
3rd Gen Engine and Drivetrain -> 2007 and up
3
11-15-2007 04:02 PM
Diesel_Dawg
1st Gen. Ram - All Topics
3
09-11-2007 10:03 PM