Got some qeastions?
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: Ft.Worth Tx.
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Got some qeastions?
All i got to do is change my main-shaft in my getrag tranny to convert to 4x4 tranny? Do i have to change the bell housing?and if so where can i find a main-shaft for my getrag.Thank you for your time
#2
Registered User
I believe the tail shaft housing and main shaft need to be swapped out to 4x4 units.
The bell housing is the same for a 2wd or 4x4.
I think I saw a Getrag complete 4x4 case with some internal issues on the 1st gen classifieds right here on DTR in the past week or so.
The bell housing is the same for a 2wd or 4x4.
I think I saw a Getrag complete 4x4 case with some internal issues on the 1st gen classifieds right here on DTR in the past week or so.
Thread
Thread Starter
Forum
Replies
Last Post
idlewildranch
3rd Gen High Performance and Accessories (5.9L Only)
8
07-28-2010 10:29 PM
vwjunkie53
3rd Gen High Performance and Accessories (5.9L Only)
2
10-31-2007 12:46 PM