1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

door locks need help

Old Apr 1, 2010 | 01:37 PM
  #1  
redneck2thamax's Avatar
Thread Starter
Registered User
 
Joined: Feb 2007
Posts: 174
Likes: 0
door locks need help

i have a 91 single cab long bed w350 and i am have been having trouble with my passenger side door lock not unlocking at the lach, so im trying to see about replacing it but am having some trouble finding them just like any other part on these old trucks. i was wondering if anyone knew where i can find door locks?
thanks
Reply
Old Apr 1, 2010 | 01:42 PM
  #2  
ofcmarc's Avatar
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
 
Joined: Oct 2006
Posts: 1,797
Likes: 9
From: 14mi North of North Pole
Do you need the latch or the lock actuator?

Latches are no longer availible so head for the junkyards.... Gassers and ramchargers use the same body parts we do. The actuators might still be availible via the aftermarket.
Reply
Old Apr 1, 2010 | 01:46 PM
  #3  
redneck2thamax's Avatar
Thread Starter
Registered User
 
Joined: Feb 2007
Posts: 174
Likes: 0
Originally Posted by ofcmarc
Do you need the latch or the lock actuator?

Latches are no longer availible so head for the junkyards.... Gassers and ramchargers use the same body parts we do. The actuators might still be availible via the aftermarket.
im pretty sure its the latches, which ya i figured i would end up going to the junkyard but i was hoping i didn't, cause its hard to find and old vehicle like that round here that isn't being used haha
Reply
Old Apr 1, 2010 | 01:58 PM
  #4  
Crossy's son's Avatar
Registered User
 
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
If you mean the key door lock cylinders....

Here you go. Just put these in the 93, work good.

http://cgi.ebay.com/ebaymotors/1991-...Q5fAccessories

My dad messaged him and talked him into just selling the door locks.

But a new igntion wouldn't be a bad idea either becuase they go bad in the dodges and having a 1 for all matching key is nice
Reply
Old Apr 1, 2010 | 03:00 PM
  #5  
Rick 12v CTD's Avatar
Registered User
 
Joined: Oct 2008
Posts: 1,591
Likes: 11
From: Thunder Bay
If it's the cylinder try spraying some penetrating oil in it. Mine binds up every couple months and won't work. Spray a little lube in there and work it for a few minutes locking and unlocking it and it'll be good to go for a while. Assuming the problem is the cylinder of course.

I have found with my truck that over the years things have gotten right stiff from dirt and grime getting stuck in the cylinder as well as the door latch. What really helped a lot was taking the whole deal right out of the door and soaking it in some varsol over night and cleaning it up and lubing it a little the next day and throwing it back in there.
Reply
Old Apr 1, 2010 | 03:08 PM
  #6  
redneck2thamax's Avatar
Thread Starter
Registered User
 
Joined: Feb 2007
Posts: 174
Likes: 0
ya i wish it was the lock cylinder but its the latch, i was wondering if there was a way to put one from a 94-95 one on there?
Reply
Old Apr 1, 2010 | 03:35 PM
  #7  
ofcmarc's Avatar
DTR's "Cooler than ice cubes 14 miles North of North Pole" member
 
Joined: Oct 2006
Posts: 1,797
Likes: 9
From: 14mi North of North Pole
gonna have to be a cannibal to get a door latch....I know..... Just finished installing a new to me latch on the passenger side. When I came across a member parting out a truck, I got both latches...... just in case.
Reply
Old Apr 1, 2010 | 04:47 PM
  #8  
Jim Lane's Avatar
Administrator
20 Year Member
Liked
 
Joined: Nov 2004
Posts: 4,084
Likes: 235
From: Southern California
Here is a look inside your door.

https://www.dieseltruckresource.com/...d.php?t=218946

And here is your latch, I gave mine a good cleaning and then regreased them.

Name:  P-shotJuly20082287.jpg
Views: 70
Size:  84.0 KB

Jim
Reply
Old Jul 22, 2010 | 12:11 PM
  #9  
1$Chuck's Avatar
Registered User
 
Joined: Jul 2010
Posts: 43
Likes: 0
From: Columbus Indiana
Jim,

I was looking at your thread called "Inside out Doors" and your power lock actuator looks different than the one I pulled out of mine last night. Has yours been replaced? I assume mine is stock but I don't know for sure. Anyway my actuator is toast and I need a new one. Anybody know where to get one? I can't find them listed at Rockauto, or any of the big chain parts store online sites.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cquestad
3rd Generation Ram - Non Drivetrain - All Years
4
May 2, 2010 11:24 PM
nomad65
3rd Generation Ram - Non Drivetrain - All Years
1
Aug 20, 2007 06:01 PM
I PASS GAS
2nd Gen. Dodge Ram - No Drivetrain
1
Jul 19, 2006 10:50 AM
Fillerupsonny
2nd Gen. Dodge Ram - No Drivetrain
12
Jun 4, 2003 01:51 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:10 AM.