Here is a bit of general information about the VE pump.

While it shows a 4 cylinder version it describes all of the components and translates from their German name into English.

Like Aah so that is what VE stands for "Verteiler" or German for distributor.

http://wiki.obed.org.uk/index.php?title=Bosch_VE

Jim

 

Thanks for posting that, Jim. Great link.

 

I just got my first 12v and i havnt done much with the cummins to begin with. can i turn the fuel pin 45 degrees and not have to worry about a runaway?

 

Turning the fuel pin can't cause a runaway.

 

Arbitrarily rotating the fuel pin one way or another means nothing. You need to remove the pin and look at it to know where it's currently set so as to know where to move it to.

 

Thanks all for your input

 

so when i check to see where the fuel pin is positions and turn it accordingly how should i adjust the smoke screw and the star nut properly to to accomidate the fuel pin?

 

You would do well to start your own thread asking how to tune your injection pump. No one's gonna recognize your asking questions in an old thread by another name.

 

Thank you BC847. Im new to all this

 

This link is no longer good.

 

Turning up the pre 94 Ram diesel injector pump

Check out this link.