400 HORSES WANTED!!! Is this how?
400 HORSES WANTED!!! Is this how?
I have a NON IC truck to start with.
I would like to acheive this and still be able to tug 10K loads occasionally.
Here is what i think will do it,
A wastegated turbo w/ stage 4 kit
A big ole ferd intercooler
EDMs!!?!?!!!!
I think that i have all the other goodies already on my ride,
OH 1 MORE thing,,,, Walbro fuel system, stock wont cut it.
I have a 5 speed, and would like to have this power to tap occasionally,
Thanks for any imput.
I do alot of highway driving, Sitting near 75-80 alot of the time,
I am not sure about a 12 cm wg, But dont see many options.
I am running a 18 cm with a stage 3, and hitting 42 lbs without the H2O meth, So i need a WG.
Peter.
I would like to acheive this and still be able to tug 10K loads occasionally.
Here is what i think will do it,
A wastegated turbo w/ stage 4 kit
A big ole ferd intercooler
EDMs!!?!?!!!!
I think that i have all the other goodies already on my ride,
OH 1 MORE thing,,,, Walbro fuel system, stock wont cut it.
I have a 5 speed, and would like to have this power to tap occasionally,
Thanks for any imput.
I do alot of highway driving, Sitting near 75-80 alot of the time,
I am not sure about a 12 cm wg, But dont see many options.
I am running a 18 cm with a stage 3, and hitting 42 lbs without the H2O meth, So i need a WG.
Peter.
I'm sure wanna will have something to say about the stage IV and breaking the 400hp mark, but I don't think 400hp is an attainable number with just a hybrid, drop a HT3B underneath it and 400hp wouldn't be a problem with fuel. You would need to step up to a larger turbo like one of the S300 builds.
jason
Do you want 400hp with the W/M or all the time PLUS the W/M? I am running the S300 from BD Power(see sig) and am very happy with it. It has an extended tip comp wheel. I believe it is only a 57mm wheel so it spools like a small turbo but because of ther extended tips it moves air like a larger turbo. Also the super B I use has a 14cm W/G turbine section. Spools very quick plus no restriction on the top end. I have not been on the dyno yet but I think I am close to 400hp with out the W/M and over 400hp with. Just guessing right now however. Also I will be doing twins as the budget allows and will do either another S300 or the bigger S400 for the bottom turbo.
Trending Topics
http://www.htturbo.com/htb2.htm
The S300G looks to be exactly what I use. The site rates it up to 425hp.
The S300G looks to be exactly what I use. The site rates it up to 425hp.
Thread
Thread Starter
Forum
Replies
Last Post




