1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

3200 spring. full throttle no load

Thread Tools
 
Search this Thread
 
Old Oct 6, 2006 | 03:51 PM
  #1  
pred's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 433
Likes: 0
From: Philly PA
3200 spring. full throttle no load

What is the rpm that might be seen under these conditions?
I guess that a runayay condition will cause!
Thank you
Peter
Reply
Old Oct 6, 2006 | 04:03 PM
  #2  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
I don't know, I'm too chicken to try it. I'd bet you could get it over 4k pretty easily.
Reply
Old Oct 6, 2006 | 06:22 PM
  #3  
pred's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 433
Likes: 0
From: Philly PA
Well Dave,,, I did have runaway 2-3 times trying to get the most of the fuel screw, so i am just a bit concerned,,, My valves have a bit of tapping now, so it is time to adjust them,, Know the clearances off the top of your head?
Peter.
Reply
Old Oct 6, 2006 | 06:40 PM
  #4  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
Stock is 0.010 intake and 0.020 exhaust. You can get a little better top end by setting them at 0.008 and 0.018.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
apwcu
1st Gen. Ram - All Topics
22
Aug 29, 2011 12:33 AM
BurrisWill
1st Gen. Ram - All Topics
14
Jan 25, 2009 08:23 PM
Jim5870
1st Gen. Ram - All Topics
2
Oct 16, 2008 06:00 AM
justagoodolboy
1st Gen. Ram - All Topics
8
Jun 7, 2006 10:20 PM
j
Performance and Accessories 2nd gen only
12
Nov 14, 2003 09:38 PM




All times are GMT -5. The time now is 08:56 PM.