jbs007

Here are some pictures of the housing install. Total time was 2 hours with cleanup. Spent the last week adding penetrating oil to the bolts and housing and then with a few hits with the hammer it came apart, much to my relief.

jbs007

with old housing removed.

jbs007

Picture of exhaust housing fromdownpipe side. Is the bold supposed to be like this to balance it?

jbs007

To great relief the housing begins to seperate, the thin red line.

jbs007

Compressor with both housings.

jbs007

housings side by side.

jbs007

exhaust port. When I took off the old 18.5 cm housing the gasket had only one opening. by the discoloration I would guess that some exhaust was making its way thrrough the gasket.

jbs007

with new two hole gasket in place ready to install.

jbs007

everything installed.

wannadiesel

[quote author=jbs007 link=board=9;threadid=19182;start=0#msg180182 date=1062626299]
Picture of exhaust housing fromdownpipe side. Is the bold supposed to be like this to balance it?
[/quote]
Yes, though mine wasn't hacked up quite so much.

Joe V

Great pics.

Lil Dog

Monty and you should get together and make an album of these photos for the Archives.

Good pictures for all of us to see what is looks like to do the housing switch.

J-eh