POPPED My Turbo...

Reply Subscribe

Thread Tools

Search this Thread

Oct 4, 2004 | 11:02 AM

#16

TexasHardcore

Thread Starter

Registered User

Joined: Dec 2003

Posts: 620

Likes: 0

From: San Marcos, TX

I'll call around and see if anyone might have an H1C spare...

NeedMoPower might sell his H1C...???

Oct 4, 2004 | 11:05 AM

#17

TomJ

Registered User

Joined: Sep 2004

Posts: 31

Likes: 0

From: Colorado

Quote:

Originally posted by TexasHardcore
I'll call around and see if anyone might have an H1C spare...

NeedMoPower might sell his H1C...???

Great! I'll also email needmopower and see about that too. THANKS!!

Oct 4, 2004 | 11:51 AM

#18

NeedMoPower

Registered User

Joined: Feb 2003

Posts: 392

Likes: 0

From: Gatesville, TX

I'll sell mine....drop me a line.
Cody

Oct 17, 2004 | 02:53 AM

#19

fahrfrumwurkin5

Registered User

Joined: Oct 2004

Posts: 13

Likes: 0

Will the H1C fit in a turbine housing that is made for a hx35?
If so, does anyone have a spare H1C center and compressor (i dont need the turbine housing) that they will let me get for cheap?

Oct 17, 2004 | 07:12 AM

#20

wannadiesel

Adminstrator-ess

Joined: Mar 2003

Posts: 22,594

Likes: 19

From: New Holland, PA

Yes, the turbine housings are interchangeable. Check the classifieds section of the site for a used turbo, you might try posting an add in the "wanted" section there as well.

Oct 17, 2004 | 06:13 PM

#21

TexasHardcore

Thread Starter

Registered User

Joined: Dec 2003

Posts: 620

Likes: 0

From: San Marcos, TX

The HX35 turbine wheel won't fit into an H1C turbine housing, since the wheel is a slight bit larger in diameter. But the H1C's will go right into the HX35's.

Oct 17, 2004 | 06:26 PM

#22

wannadiesel

Adminstrator-ess

Joined: Mar 2003

Posts: 22,594

Likes: 19

From: New Holland, PA

Then how come the 16 cm housing fits the HX-35?

Oct 17, 2004 | 07:59 PM

#23

Forrest Nearing

Banned

Joined: Jan 2004

Posts: 2,800

Likes: 0

HX35 and H1C turbine wheels interchange.

Forrest

Oct 18, 2004 | 12:35 AM

#24

fahrfrumwurkin5

Registered User

Joined: Oct 2004

Posts: 13

Likes: 0

So are the turbine wheels the same diameter? If I was to put a h1c in an hx35 turbine housing, would there be clearance issues (turbine wheel being over .040" too small) ??

Oct 18, 2004 | 08:13 AM

#25

TomJ

Registered User

Joined: Sep 2004

Posts: 31

Likes: 0

From: Colorado

Quote:

Originally posted by fahrfrumwurkin5
So are the turbine wheels the same diameter? If I was to put a h1c in an hx35 turbine housing, would there be clearance issues (turbine wheel being over .040" too small) ??

Identical.

Oct 19, 2004 | 12:55 AM

#26

fahrfrumwurkin5

Registered User

Joined: Oct 2004

Posts: 13

Likes: 0

sweeeeeeeeeeeeet. Does anyone know how much the h1c flows in lbs/min? I can't find it anywhere, and alot of people say that the compressor map is almost the same as an HX35.