After what seemed like an eternity I have my truck back. A Very Special Thanks goes out to Enterprise Engine and also Kurt Yardley. EE o-ringed the block, cam install, EE custom fuel system, HUGE injectors, and last but not least TWINS . ;DThey are based on Kurt's B-1 ( standard housing ) and a new B-2 which should be an HT3B killer. Right now we are just starting testing but performance is awesome . EGT's are well in check, how about 975 @ 50psi and 1150 @ 65psi all with BD7's. Also being used is Kurt's new billet wastegate. Spool-up is best described as instant and brutal with no lag. The bd7's are completely street-able with virtually no smoke on the bottom and none after initial takeoff. I 'll do my best to answer questions but we are just starting to fine tune everything so some things will change. Hope to see everyone in Muncie. <br><br>Fred<br><br><br>__________________<br>

 

Fred thanks for the info please let us know how things work out as this is the system that i will be going with.I already have the b1 standard housing &amp; will be very interested in how the b2 &amp; all the rest works out..thanks kurt.ps how about some photos..

 

Kurt I will post some pictures as soon as I can. Will you be in Muncie? I have a few bugs to work out but with a little luck should be ready. Guy's only one response ??? I thought this post would raise a few eyebrows? Where are all the Horsepower Junkies Hiding ;D. Later Fred

 

when you take pictures make sure you have a ruler next to everything so we can copy it! <br><br>just kiddin :P

 

Fred no i will not make it to muncie but my eyebrows are raised &amp; im going to realy be watchin you .I called kurt for a little info on this set up &amp; i am realy interested.thanks for the response &amp; some photos are great.kurt.

 

[quote author=Offshoreracer link=board=7;threadid=15485;start=0#145849 date=1054782271]<br>I thought this post would raise a few eyebrows? Where are all the Horsepower Junkies Hiding ;D. Later Fred<br>[/quote]<br><br>I'm not sure if I am a HP junkie but I am envious of anyone that has twins.<br><br>Now I will go back to my corner and :'( in my beer because I don't have twins yet.<br><br>

 

OOOOYAAAAAAAA ;D ;D<br><br> RAMGUY

 

[quote author=Offshoreracer link=board=7;threadid=15485;start=0#145849 date=1054782271]
I thought this post would raise a few eyebrows? Where are all the Horsepower Junkies Hiding [/quote]

It did 8) It turned out to be perfect timing, just saving the pennies so my B1 can get its Big Brother. Thanks for answering my PM's, let us know how they perform at Muncie for you.

 

Fred, sounds like a nice setup!!

 

Getting ready now to leave in the early a.m. . Still have an annoying electronic glitch, but with a little luck I will make Kurt proud ( are you listening ;D ). I will post results whether good or bad but we still need a lot of fine tuning ( wastegate/injectors). Just haven't had time enough to test. Now if I can just outpull that darn Sled Puller ;D . Later Fred

 

I'm Bummed!! :-[ I was sure a RV was sold and the Sweet Wifey said I could use some of the sale money and go to Muncie!! But here it is Fri Morn and I back at work with only 5 hours sleep after a 20 Hr work day yesterday and the RV is even still sitting here!!!<br><br>If anyone feels sorry enough for me Please send $10 cash, check, or Money order to &quot;OverWorked, UnderPaid, Unappreciated, Movingrealslowtoday Kurt&quot; <br><br>Heck I will even accept aluminum cans!! ;D ;D

 

You want the cans full and ice cold or empty and warm????? ;D ;D ;D<br><br> I am sending you some cheese for the bottle of 'whine' you opened... <br><br> Rick

 

[quote author=Offshoreracer link=board=7;threadid=15485;start=0#146274 date=1054867822]<br>Getting ready now to leave in the early a.m. . Still have an annoying electronic glitch, but with a little luck I will make Kurt proud ( are you listening ;D ). I will post results whether good or bad but we still need a lot of fine tuning ( wastegate/injectors). Just haven't had time enough to test. Now if I can just outpull that darn Sled Puller ;D . Later Fred<br>[/quote]<br><br>Fred, have fun...will this system void your warranty?

 

[quote author=Scotty link=board=7;threadid=15485;start=0#146444 date=1054912787]
Fred, have fun...will this system void your warranty?
[/quote]

;D I hope he has his copy of the Magnussen Moss act in his truck ;D

Fred, have a great weekend!

TwinturboenvyRAM