PDR HX40 and Megamouth?
Thread Starter
Registered User
Joined: Jun 2007
Posts: 433
Likes: 0
From: Sioux Falls, SD
PDR HX40 and Megamouth?
Will the HX40 work with the megamouth elbow/downpipe combo?
This is what PDRs site says about the exhuast housing on it;
"With HX40 exhaust housings, the flange is 4" straight out of the turbo and does not use an exhaust elbow. For some applications, this will require the use of a new down pipe and a 4" V-band clamp. Down pipe and clamp are not included, sold separately."
This is what PDRs site says about the exhuast housing on it;
"With HX40 exhaust housings, the flange is 4" straight out of the turbo and does not use an exhaust elbow. For some applications, this will require the use of a new down pipe and a 4" V-band clamp. Down pipe and clamp are not included, sold separately."
Registered User
Joined: May 2006
Posts: 596
Likes: 0
From: Hills of West Virginia
Will the HX40 work with the megamouth elbow/downpipe combo?
This is what PDRs site says about the exhuast housing on it;
"With HX40 exhaust housings, the flange is 4" straight out of the turbo and does not use an exhaust elbow. For some applications, this will require the use of a new down pipe and a 4" V-band clamp. Down pipe and clamp are not included, sold separately."
This is what PDRs site says about the exhuast housing on it;
"With HX40 exhaust housings, the flange is 4" straight out of the turbo and does not use an exhaust elbow. For some applications, this will require the use of a new down pipe and a 4" V-band clamp. Down pipe and clamp are not included, sold separately."
Thread
Thread Starter
Forum
Replies
Last Post
Txwelder
Performance and Accessories 2nd gen only
14
Nov 11, 2007 04:28 PM
xp8103
Performance and Accessories 2nd gen only
3
May 5, 2007 12:52 PM
Jordan5687
Performance and Accessories 2nd gen only
2
Feb 14, 2007 05:00 PM
Hawkeye
Performance and Accessories 2nd gen only
11
Sep 23, 2003 08:22 PM
